Yamaha XVZ13TF 1999 Service Manual page 75

L Fasten the speed sensor lead, fuel pump lead and fuse box lead with a
plastic clamp.
M Fasten the speed sensor lead with a plastic clamp.
N Turn the lead wire to clamp on the rear arm section.
O Route the wire harness behind the igniter unit.
P From coolant reservoir tank.
Q From air cleaner case.
R From engine.
S Route the hoses on the left side of the engine leads.
T Fasten the starter lead, pick up lead, AC magneto lead, neutral switch
lead, ignition coil sub lead and oil level gauge lead with a plastic clamp.
U From fuel tank
V Make sure that the sidestand switch lead has no loosening.
CABLE ROUTING
2-41
SPEC