Yamaha XVZ13TF 1999 Service Manual page 20

FEATURES
c. Push the up-down switch 1 in either direc-
tion to select the channel number to be set for
the current station. (Ch1, Ch2, Ch3, Ch4,
Ch5 and Ch6)
d. Press the "SELECT" button to programing
the channel in memory.
Repeat this procedure for the remaining sta-
tions desired to be preset in the memory.
Stations can be also be automatically preset by
the following procedure.
a. Push the "SELECT" button until the radio fre-
quency and the channel "Ch" start flashing.
b. Push the up-down button in either direction
for at least 1 second to automatically tune in
a station.
c. When the desired station is found, push the
up-down switch for less than one second to
select the channel number to be set for that
station.
d. Push the "SELECT" button to programing the
channels in memory.
e. Repeat this procedure for the remaining sta-
tions desived to be preset in memory.
Programing preset stations in memory auto-
matically
Setting up to 6 channels can be made by the fol-
lowing procedure.
NOTE:
Stations will be starting from the station preset
at chanel 6.
It is recommended to use this function only in
areas with strong radio frequencies.
a. Push the "SELECT" button until the radio fre-
quency and the channel "Ch" start flashing.
b. Push the up-down switch 1 in either direc-
tion to select channel "A".
c. Press the "SELECT" button to start the ran-
dom channel selection and the tuner will au-
tomatically write the channels in memory.
1-9
GEN
INFO