Yamaha XVZ13TF 1999 Service Manual page 22

FEATURES
Selecting the output for speaker or headset
(optional)
To select the output for speaker or headset,
push the "SELECT" button and the "SP" (speak-
er) or "HS" (headset) indicator will appear. To
change between speaker and headset, push
the up-down switch 1 in either direction.
NOTE:
The speaker and headset cannot be used the
same time.
Controlling the bass level
a. To control the bass level, push the "SELECT"
button until the "BASS" indicator appears.
b. Push the up-down switch 1 in either direc-
tion to change the level.
Controllingthe treble level
a. To control the treble level, push the "SE-
LECT" button until the "TREB" indicator ap-
pears.
b. Push the up-down switch 1 in either direc-
tion to change the level.
The treble level can be set from –6 to +6.
Controlling the fader (balance between front
and rear speakers)
a. To control the fader, push the "SELECT" but-
ton until the "FAD" indicator appears.
b. Push the up-down switch 1 in either direc-
tion to change the balance.
The fader level can be adjusted from F9 to
R9.
Controlling the intercom volume level
a. To control the intercom volume level, push
the "SELECT" button until the "IC:" indicator
appears.
b. Push the up-down switch 1 in either direc-
tion to change the volume level.
The intercom volume level can be set from 0
to 20.
1-11
GEN
INFO