Assembling The Carburetors - Yamaha XVZ13TF 1999 Service Manual

CARBURETORS
13. Check:
S fuel feed hoses
S fuel hoses
Cracks/damage/wear ! Replace.
Obstruction ! Clean.
Blow out the hoses with compressed air.
EAS00489

ASSEMBLING THE CARBURETORS

The following procedure applies to both of the
carburetors.
CAUTION:
S Before assembling the carburetors, wash
all of the parts in a petroleum-based sol-
vent.
S Always use a new gasket.
1. Install:
S piston valve holder
2. Install:
S needle jet 1
S pilot jet
S main jet
NOTE:
Align the slot a on the needle jet with the pro-
jection b on the carburetor body.
3. Measure:
S float height a
Out of specification ! Adjust.
Float height
8.0 X 9.0 mm
6-8
CARB