Yamaha XVZ13TF 1999 Service Manual page 276

WATER PUMP
2. Install:
S O-ring (New)
S water pump housing cover 1
S O-ring (New)
S water pump inlet hose 2
WARNING
Always use a new O-ring.
NOTE:
Before installing the water pump inlet pipe 2 ,
apply a thin coat of lithium soap base grease
onto the O-rings.
3. Fill:
S cooling system
(with the specified amount of the recom-
mended coolant)
Refer to "CHANGING THE COOLANT" in
CHAPTER 3.
4. Check:
S cooling system
Leaks ! Repair or replace the faulty part.
5. Measure:
S radiator cap opening pressure
Below the specified pressure ! Replace the
radiator cap.
Refer to "CHECKING THE RADIATOR".
5-15
COOL
10 Nm (1.0 mSkg)