Yamaha XVZ13TF 1999 Service Manual page 73

M Position the end of clamp to the rear side of the
motorcycle.
N Position the end of clamp to the rear side of the
motorcycle.
O To the engine.
P Clamp the horn lead white mark and ground lead.
Q Route the battery negative lead between the wire
harness and pipe.
R To the AIS.
S Fasten the wire harness, flasher relay and ther-
mo switch lead with a plastic clamp.
T Fasten the wire harness with a plastic clamp.
U To the rear fender.
CABLE ROUTING
V To the coolant reservoir tank cap.
W Fasten the high tension cord #1 and #3 with a
plastic clamp.
X Align the cover on the high tension cord with the
clamp.
Y Clamp the AIS hose as far as possible from the
frame.
2-39
SPEC