Yamaha Venture XVZ13TFW Owner's Manual
  1. Manuals
  2. Brands
  3. Yamaha Manuals
  4. Motorcycle
  5. Venture XVZ13TFW
  6. Owner's manual
Yamaha Venture XVZ13TFW Owner's Manual

Yamaha Venture XVZ13TFW Owner's Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
OWNER'S MANUAL
XVZ13TFW(C)
XVZ13TFMW(C)
LIT-11626-20-24
2C9-28199-11

Advertisement

Table of Contents
loading

Related Manuals for Yamaha Venture XVZ13TFW

Summary of Contents for Yamaha Venture XVZ13TFW

  • Page 1 OWNER’S MANUAL XVZ13TFW(C) XVZ13TFMW(C) LIT-11626-20-24 2C9-28199-11...
  • Page 2 EAU10041...
  • Page 3 Yamaha has met these standards without reducing the performance or economy of operation of the motorcycle. To maintain these high standards, it is important that you and your Yamaha dealer pay close attention to the recommended maintenance schedules and operating instructions contained within this manual.

  • Page 4: Important Manual Information

    This manual should be considered a permanent part of this motorcycle and should remain with it even if the motorcycle is subsequently sold. Yamaha continually seeks advancements in product design and quality. Therefore, while this manual contains the most current product information available at the time of printing, there may be minor discrepancies between your motorcycle and this manual.
  • Page 5 IMPORTANT MANUAL INFORMATION AND UNTIL YOU HAVE BEEN TRAINED IN SAFE AND PROPER RIDING TECHNIQUES. REGULAR INSPECTIONS AND CAREFUL MAINTENANCE, ALONG WITH GOOD RIDING SKILLS, WILL ENSURE THAT YOU SAFELY ENJOY THE CAPABILITIES AND THE RELIABILITY OF THIS MOTORCYCLE. *Product and specifications are subject to change without notice.
  • Page 6 IMPORTANT MANUAL INFORMATION EAU10192 AFFIX DEALER LABEL HERE XVZ13TFW(C)/XVZ13TFMW(C) OWNER’S MANUAL ©2006 by Yamaha Motor Corporation, U.S.A. 1st edition, May 2006 All rights reserved. Any reprinting or unauthorized use without the written permission of Yamaha Motor Corporation, U.S.A. is expressly prohibited.

  • Page 7: Table Of Contents

    TABLE OF CONTENTS SAFETY INFORMATION ....1-1 Sidestand ........3-18 PERIODIC MAINTENANCE AND Location of important labels ...1-5 Ignition circuit cut-off system ..3-19 MINOR REPAIR ......... 7-1 Auxiliary DC jack and PERIODIC MAINTENANCE ... 7-1 DESCRIPTION ........2-1 connector ........3-21 Owner’s tool kit .......
  • Page 8 ....7-28 Motorcycle noise regulation ..10-4 Checking and lubricating the Maintenance record ..... 10-5 brake and shift pedals ....7-28 YAMAHA MOTOR CORPORATION, Checking and lubricating the U.S.A. ROYAL STAR™ ® brake and clutch levers .....7-29 VENTURE...

  • Page 9: Safety Information

    SAFETY INFORMATION EAU10251 AND/OR WHEN MADE NECES- • Ride where other motorists can SARY BY MECHANICAL CONDI- see you. Avoid riding in another MOTORCYCLES SINGLE TIONS. motorist’s blind spot. TRACK VEHICLES. THEIR SAFE USE Many motorcycle accidents in- AND OPERATION ARE DEPENDENT Safe riding volve inexperienced operators.
  • Page 10 Modifications made to this motorcycle other motorists can see you. the single most critical factor in the pre- not approved by Yamaha, or the re- The posture of the operator and vention or reduction of head injuries. moval of original equipment, may ren- passenger is important for proper Always wear an approved helmet.
  • Page 11 Maximum load: been specifically designed for use on create instability due to improper 190 kg (419 lb) this motorcycle. Since Yamaha cannot weight distribution or aerody- test all other accessories that may be namic changes. If accessories When loading within this weight limit,...
  • Page 12 SAFETY INFORMATION tor and may limit control ability, Always turn the engine off before eyes, see your doctor immediately. therefore, such accessories are leaving the motorcycle unattended If any gasoline spills on your skin not recommended. and remove the key from the main or clothing, immediately wash the Use caution when adding electri- switch.

  • Page 13: Location Of Important Labels

    SAFETY INFORMATION EAU10381 Location of important labels Please read the following important labels carefully before operating this vehicle.
  • Page 14 SAFETY INFORMATION CAUTION Cleaning with alkaline or acid cleaner, gasoline or solvent will damage windshield. Use neutral detergent. 5JW-00 (5JW-2835Y-00) 4 CALIFORNIA ONLY...

  • Page 15: Description

    DESCRIPTION EAU10410 Left view 1. Shift pedal (page 3-9) 9. Helmet holder (page 3-14) 2. Starter (choke) knob (page 3-12) 10.Tail/brake light (page 7-36) 3. Fuel tank cap (page 3-10) 11.Rear turn signal light (page 7-36) 4. Fuel cock (page 3-11) 5.

  • Page 16: Right View

    DESCRIPTION EAU10420 Right view 1. Muffler 9. Front fork air valve (page 3-16) 2. Owner’s tool kit (page 7-1) 10.Headlight (page 7-35) 3. Helmet holder (page 3-14) 11.Front turn signal/position lights (page 7-36) 4. Travel trunk (page 3-14) 12.Fuse box 1 (page 7-33) 5.

  • Page 17: Controls And Instruments

    DESCRIPTION EAU10430 Controls and instruments 1. Clutch lever (page 3-8) 9. Brake lever (page 3-9) 2. Audio system/CB radio control unit (page 4-3) 3. Left handlebar switches (page 3-7) 4. Rider headset jack (page 4-2) 5. Speedometer unit (page 3-4) 6.

  • Page 18: Instrument And Control Functions

    INSTRUMENT AND CONTROL FUNCTIONS EAU10460 EAU10680 To unlock the steering Main switch/steering lock LOCK The steering is locked, and all electrical systems are off. The key can be re- moved. To lock the steering 1. Push. 2. Turn. The main switch/steering lock controls the ignition and lighting systems, and is Push the key in, and then turn it to used to lock the steering.

  • Page 19: Indicator And Warning Lights

    INSTRUMENT AND CONTROL FUNCTIONS EAU10951 EAU11003 ACC (Accessory) Indicator and warning lights The audio system and the auxiliary DC jack and connector can be used in this position. Do not use the accessory po- sition for an extended period of time, otherwise the battery may discharge.
  • Page 20 When this occurs, Yamaha dealer check the electri- The electrical circuit of the warning light have a Yamaha dealer check the self- cal circuit. diagnosis system. can be checked according to the follow- NOTE: ing procedure.

  • Page 21: Speedometer Unit

    INSTRUMENT AND CONTROL FUNCTIONS EAU36400 a clock Speedometer unit NOTE: a fuel meter After resetting the fuel reserve tripme- ter, the display will return to the prior Odometer and tripmeter modes mode. Pushing the “SELECT” button switches the display between the odometer mode “ODO”...

  • Page 22: Cruise Control System

    To activate and set the cruise control will start flashing. If this occurs, have a system: Yamaha dealer check the electrical cir- 1. Push the “CRUISE” switch to the cuit. left. The “ON” indicator light will...
  • Page 23 2. “RES” indicator light Push the “CANCEL” switch to manually this occurs, turn the cruise control 3. “ON” indicator light deactivate cruise control. system off and have a Yamaha deal- er check it. NOTE: NOTE: Pressing the cruise control switch once...

  • Page 24: Handlebar Switches

    INSTRUMENT AND CONTROL FUNCTIONS EAU12346 Right EAU12430 Handlebar switches Turn signal switch “ ” To signal a right-hand turn, push this Left switch to “ ”. To signal a left-hand turn, push this switch to “ ”. When re- leased, the switch returns to the center position.

  • Page 25: Clutch Lever

    INSTRUMENT AND CONTROL FUNCTIONS EAU12660 ECA10061 EAU12820 Engine stop switch “ ” Clutch lever CAUTION: Set this switch to “ ” before starting Do not use the hazard lights for an the engine. Set this switch to “ ” to extended length of time with the en- stop the engine in case of an emergen- gine not running, otherwise the bat-...

  • Page 26: Shift Pedal

    INSTRUMENT AND CONTROL FUNCTIONS EAU12880 EAU12890 EAU12941 Shift pedal Brake lever Brake pedal 1. Shift pedal 1. Brake lever 1. Brake pedal The shift pedal is located on the left The brake lever is located at the right The brake pedal is on the right side of side of the engine and is used in com- handlebar grip.

  • Page 27: Fuel Tank Cap

    INSTRUMENT AND CONTROL FUNCTIONS EAU13120 EAU13211 Fuel tank cap NOTE: Fuel The fuel tank cap cannot be installed unless the key is in the lock. In addition, the key cannot be removed if the cap is not properly installed and locked. EWA10130 WARNING Make sure that the fuel tank cap is...

  • Page 28: Fuel Cock

    10%. Gasohol UNLEADED GASOLINE ONLY containing methanol is not recom- Fuel tank capacity: mended by Yamaha because it can 22.5 L (5.94 US gal) (4.95 Imp.gal) cause damage to the fuel system or ve- Fuel reserve amount: hicle performance problems.

  • Page 29: Starter (Choke) Knob

    INSTRUMENT AND CONTROL FUNCTIONS This indicates reserve. With the fuel EAU13600 Starter (choke) knob “ ” cock lever in this position, the fuel re- serve is made available. Turn the fuel cock lever to this position if you run out of fuel while riding.

  • Page 30: Locking The Steering With A Padlock

    INSTRUMENT AND CONTROL FUNCTIONS EAU13780 EAU14240 Locking the steering with a Rider seat padlock To remove the rider seat Remove the nuts, and then pull the rid- er seat up. 1. Projection 2. Seat holder NOTE: In addition to the main switch/steering Make sure that the rider seat is properly lock, there are brackets on the right secured before riding.

  • Page 31: Helmet Holders

    INSTRUMENT AND CONTROL FUNCTIONS EAU14360 To close a helmet holder EAU14631 Helmet holders Sidecases and travel trunk Place the helmet holder in the original EWA11081 position, and then remove the key. WARNING EWA11040 Improper loading or overloading can WARNING cause loss of control and possibly Never ride with a helmet attached to an accident or personal injury.
  • Page 32 INSTRUMENT AND CONTROL FUNCTIONS er conditions may make it nec- essary to further reduce the riding speed. Sidecases To open a sidecase 1. Insert the key into the lock, turn it counterclockwise, and then push it 1. Storage compartment 1. Travel trunk lock 2.

  • Page 33: Adjusting The Front Fork

    INSTRUMENT AND CONTROL FUNCTIONS ECA10910 EAU14651 Adjusting the front fork CAUTION: This front fork is equipped with air Do not apply excessive pressure on valves for adjusting the spring rate. the travel trunk lid when it is open. EWA10180 WARNING To close the travel trunk Always adjust both fork legs equal- 1.

  • Page 34: Adjusting The Shock Absorber Assembly

    A low-pressure air gauge is This shock absorber assembly is available at a Yamaha dealer. equipped with an air valve for adjusting 4. To increase the spring rate and the spring rate. thereby harden the suspension, in-...

  • Page 35: Sidestand

    INSTRUMENT AND CONTROL FUNCTIONS EAU15301 below and have a Yamaha dealer re- Spring rate: Sidestand pair it if it does not function proper- Minimum (soft): The sidestand is located on the left side Air pressure = 0 kPa (0 psi) (0 of the frame.

  • Page 36: Ignition Circuit Cut-Off System

    Periodically check the operation of the ignition circuit cut-off system according to the following procedure. EWA10250 WARNING If a malfunction is noted, have a Yamaha dealer check the system be- fore riding. 3-19...
  • Page 37 5. Push the start switch. Does the engine start? The neutral switch may be defective. The motorcycle should not be ridden until checked by a Yamaha dealer. With the engine still running: 6. Move the sidestand up. 7. Keep the clutch lever pulled.

  • Page 38: Auxiliary Dc Jack And Connector

    INSTRUMENT AND CONTROL FUNCTIONS EAU15412 12-V accessories connected to the Auxiliary DC jack and connec- auxiliary DC jack at the front and auxil- iary DC connector under the rider seat can be used when the key is in the “ACC” or “ON” position. ECA11031 CAUTION: The accessories connected to the...

  • Page 39: Audio System And Cb Radio

    AUDIO SYSTEM AND CB RADIO EAU15440 Location of parts 1. Audio system/CB radio control unit 7. Cassette deck compartment 2. Front speaker 8. Auxiliary audio input jack 3. Rider headset jack 9. Rear speaker 4. Cassette deck lid 10.Passenger volume control knob 5.

  • Page 40: Headsets (Optional)

    When cleaning the control unit sion, a headset is necessary; however, display, use a neutral detergent. CB reception is possible without a Never strong abrasive headset. For intercom use, two head- cleaning products, fuel (gaso- sets are necessary. Consult a Yamaha line), thinner, etc.

  • Page 41: Control Unit

    AUDIO SYSTEM AND CB RADIO EAU15462 Selecting a track on the optional Control unit CD changer (Tape) Selecting a CB channel Adjusting the CB squelch level (Auxiliary (CD changer*) Tuning in a radio station manually audio source) Adjusting the intercom volume * The CD mode appears in the display only Changing the settings in a mode when the optional CD changer is installed.

  • Page 42: Making Basic Settings

    AUDIO SYSTEM AND CB RADIO Audio system Long push (one second or more) EAU15480 Making basic settings Turning off the CB radio BASS TREB SP/HS (Output) (Treble) (Fade ) Turning on/off the audio system Radio frequency (Auto (Intercom volume) volume) This mode does not appear in the display when the headsets are selected as the output.
  • Page 43 AUDIO SYSTEM AND CB RADIO Adjusting the audio system volume Turning on/off the CB radio be set between “0” and “20”. After the adjustment is made, the CB radio re- turns to normal operation and the CB channel appears in the display. 1.

  • Page 44: Making Mode Settings

    AUDIO SYSTEM AND CB RADIO EAU15502 Audio system Selecting the output (speakers or Making mode settings headsets) BASS TREB SP/HS (Output) (Treble) (Fade ) General procedure The following setting procedure applies Radio to the audio system, CB radio, and op- frequency (Auto (Intercom...
  • Page 45 AUDIO SYSTEM AND CB RADIO Adjusting the bass level Adjusting the treble level Adjusting the fade level (balance be- tween front and rear speakers) 1. Repeatedly push the “SELECT” 1. Repeatedly push the “SELECT” button for less than one second button for less than one second 1.
  • Page 46 AUDIO SYSTEM AND CB RADIO Adjusting the auto volume Turning on/off the CB roger beep NOTE: When the fade level is set to “0”, the front and rear speaker levels are the same. Adjusting the intercom volume When riding the vehicle, external noise 1.

  • Page 47: Cassette Deck Operation

    AUDIO SYSTEM AND CB RADIO EAU15520 EWA11380 To clean the tape head, use a Cassette deck operation WARNING de-magnetizing cleaning cas- It is dangerous to operate the sette, but be sure to turn the vol- ume all the way down to avoid cassette deck while riding.
  • Page 48 AUDIO SYSTEM AND CB RADIO Skipping songs Changing the tape play direction NOTE: The maximum number of songs that can be skipped in either direc- tion is 9. To stop skipping songs, push the up/down switch in the opposite di- rection that songs are being skipped.

  • Page 49: Radio Operation

    AUDIO SYSTEM AND CB RADIO Turning on/off the Dolby noise re- Ejecting the cassette tape EAU15533 Radio operation duction system 1. Eject (“ ”) button 1. Radio antenna While the cassette tape is playing, push Push the eject (“ ”) button to eject the the eject (“...
  • Page 50 AUDIO SYSTEM AND CB RADIO EWA11390 Selecting a frequency band WARNING (Tape) It is dangerous to operate the ra- dio while riding. Never take your (Auxiliary (CD changer*) hands off the handlebars while audio source) riding. * The CD mode appears in the display only Keep the volume at a low when the optional CD changer is installed.
  • Page 51 AUDIO SYSTEM AND CB RADIO tunes in the first station that has a played. The frequency changes in Programming preset radio stations strong enough signal to be re- 0.2-MHz steps for FM and in 10- manually ceived. kHz steps for AM. Tuning in a radio station manually Tuning in a preset radio station Up to six stations can be programmed...
  • Page 52 AUDIO SYSTEM AND CB RADIO 3. Repeatedly push either side of the 3. Push either side of the up/down Up to six stations can be programmed up/down switch for less than one switch once for one second or automatically for each frequency band second until the desired preset more to tune in a station automati- (FM1, FM2, FM3, and AM) as follows.

  • Page 53: Optional Cd Changer Operation

    Selecting a CD An optional six-disc CD changer can be mounted in the travel trunk. Ask a Yamaha dealer to install the genuine Clarion CDC635 model. Playing a CD Repeatedly push either side of the...

  • Page 54: Cb Radio Operation

    AUDIO SYSTEM AND CB RADIO Selecting a CD track EAU15550 EWA11410 CB radio operation WARNING Repeatedly push either side of the up/down switch for less than one sec- It is dangerous to change CB ra- ond until the number for the desired CD dio channels or adjust the vol- track appears in the display.
  • Page 55 AUDIO SYSTEM AND CB RADIO The Citizens Band Radio Service is lessening of the operating privileges or 1. Make sure that the CB radio is under the jurisdiction of the Federal responsibilities of CB users. An opera- turned on and is selected. (See Communications Commission tor of a CB radio station is still required...
  • Page 56 AUDIO SYSTEM AND CB RADIO Adjusting the squelch level returns to normal operation and Adjusting the receiving volume the CB channel appears in the dis- play. For maximum reception sensitivity, the squelch level should be set by turning the control knob fully counterclockwise, and then slowly turning it clockwise un- til the background noise has been suffi- ciently reduced.
  • Page 57 AUDIO SYSTEM AND CB RADIO Channel information Channel Channel Frequency in MHz Channel Channel Frequency in MHz 26.965 27.215 26.975 27.225 36.985 27.235 27.005 27.245 27.015 27.255 27.025 27.265 27.035 27.275 27.055 27.285 27.065 27.295 27.075 27.305 27.085 27.315 27.105 27.325 27.115 27.335...

  • Page 58: Auxiliary Audio Source Operation

    AUDIO SYSTEM AND CB RADIO Transmitting and receiving EAU15570 Auxiliary audio source opera- tion Transmission Auxiliary audio equipment can be con- nected to, and played through, the au- dio system. 1. Insert the output plug of the auxil- iary equipment into the jack locat- ed at the right of the cassette deck.
  • Page 59 AUDIO SYSTEM AND CB RADIO 4-21...

  • Page 60: Pre-Operation Checks

    PRE-OPERATION CHECKS EAU15591 The condition of a vehicle is the owner’s responsibility. Vital components can start to deteriorate quickly and unexpectedly, even if the vehicle remains unused (for example, as a result of exposure to the elements). Any damage, fluid leakage or loss of tire air pressure could have serious consequences.

  • Page 61: Pre-Operation Check List

    • If necessary, add recommended coolant to specified level. 7-16 • Check cooling system for leakage. • Check operation. • If soft or spongy, have Yamaha dealer bleed hydraulic system. • Check lever free play. • Adjust if necessary. Front brake •...
  • Page 62 • Make sure that operation is smooth. • Check cable free play. Throttle grip 7-20, 7-28 • If necessary, have Yamaha dealer adjust cable free play and lubricate cable and grip housing. • Make sure that operation is smooth. Control cables 7-27 •...

  • Page 63: Operation And Important Riding Points

    Never start the engine or oper- EWA10290 should be on, otherwise have a WARNING ate it in a closed area for any Yamaha dealer check the electrical cir- length of time. Exhaust fumes Before starting engine, cuit.
  • Page 64 OPERATION AND IMPORTANT RIDING POINTS ECA15260 ately stop the engine, and then bility of excessive exhaust emissions, CAUTION: have a Yamaha dealer check the never leave the starter (choke) on long- electrical circuit. er than necessary. The time necessary The oil level warning light...

  • Page 65: Starting A Warm Engine

    OPERATION AND IMPORTANT RIDING POINTS EAU16640 EAU16671 ECA10260 Starting a warm engine Shifting CAUTION: Follow the same procedure as for start- Even with the transmission in ing a cold engine with the exception the neutral position, do not that the starter (choke) is not required coast for long periods of time when the engine is warm.

  • Page 66: Engine Break-In

    OPERATION AND IMPORTANT RIDING POINTS 4. At the recommended shift points 3. Shift the transmission into the neu- EAU16841 Engine break-in shown in the following table, close tral position when the motorcycle There is never a more important period the throttle, and at the same time, is almost completely stopped.

  • Page 67: Parking

    CAUTION: touch them. If any engine trouble should occur Do not park on a slope or on soft during the engine break-in period, ground, otherwise the vehicle immediately have a Yamaha dealer may overturn. check the vehicle.

  • Page 68: Periodic Maintenance And Minor Repair

    TRAINED AND EQUIPPED TO PER- certain maintenance work correctly. FORM THESE PARTICULAR SER- VICES. NOTE: If you do not have the tools or experi- ence required for a particular job, have a Yamaha dealer perform it for you.
  • Page 69 PERIODIC MAINTENANCE AND MINOR REPAIR EWA10340 WARNING Modifications approved Yamaha may cause loss of perfor- mance, excessive emissions, and render the vehicle unsafe for use. Consult a Yamaha dealer before at- tempting any changes.

  • Page 70: Periodic Maintenance Chart For The Emission Control System

    • Replace gasket(s) if necessary. Evaporative emis- • Check control system for dam- √ sion control system age. (For California only) • Replace if necessary. * Since these items require special tools, data and technical skills, have a Yamaha dealer perform the service.

  • Page 71: General Maintenance And Lubrication Chart

    PERIODIC MAINTENANCE AND MINOR REPAIR EAU32183 General maintenance and lubrication chart INITIAL ODOMETER READINGS 600 mi 4000 mi 8000 mi 12000 mi 16000 mi 20000 mi ITEM ROUTINE (1000 km) (7000 km) (13000 km) (19000 km) (25000 km) (31000 km) 1 month 6 months 12 months...
  • Page 72 PERIODIC MAINTENANCE AND MINOR REPAIR INITIAL ODOMETER READINGS 600 mi 4000 mi 8000 mi 12000 mi 16000 mi 20000 mi ITEM ROUTINE (1000 km) (7000 km) (13000 km) (19000 km) (25000 km) (31000 km) 1 month 6 months 12 months 18 months 24 months 30 months...
  • Page 73 Front and rear brake √ √ √ √ √ √ 23 * • Check operation. switches • Apply Yamaha chain and cable √ √ √ √ √ √ 24 * Control cables lube or engine oil SAE 10W-30 thoroughly. • Check operation and free play.
  • Page 74 • Adjust headlight beam. * Since these items require special tools, data and technical skills, have a Yamaha dealer perform the service. NOTE: From 24000 mi (37000 km) or 36 months, repeat the maintenance intervals starting from 8000 mi (13000 km) or 12 months.

  • Page 75: Removing And Installing Cowlings And Panels

    PERIODIC MAINTENANCE AND MINOR REPAIR EAU18712 Removing and installing cowl- ings and panels The cowlings and panels shown need to be removed to perform some of the maintenance jobs described in this chapter. Refer to this section each time a cowling or panel needs to be re- moved and installed.
  • Page 76 PERIODIC MAINTENANCE AND MINOR REPAIR NOTE: Make sure that the projection fits into the grommet. 2. Install cowling A. EAU35860 Panels A and B To remove one of the panels 1. Grommet 1. Cowling B Remove the bolt, and then pull the pan- 2.
  • Page 77 PERIODIC MAINTENANCE AND MINOR REPAIR 1. Panel B 1. Panel C EAU19333 2. Bolt 2. Screw Panel C 3. Bolt To install the panel To remove the panel To install the panel Place the panel in the original position, 1. Remove panel B. 1.

  • Page 78: Checking The Spark Plugs

    1. Spark plug cap 1. Spark plug gap diagnose such problems yourself. In- 2. Remove the spark plug as shown, stead, have a Yamaha dealer check Spark plug gap: with the spark plug wrench includ- the vehicle. 0.8–0.9 mm (0.031–0.035 in) ed in the owner’s tool kit.

  • Page 79: Canister (For California Only)

    PERIODIC MAINTENANCE AND MINOR REPAIR 2. Clean the surface of the spark plug EAU19672 EAU19902 Canister (for California only) Engine oil and oil filter car- gasket and its mating surface, and tridge then wipe off any grime from the The engine oil level should be checked spark plug threads.
  • Page 80 An oil filter wrench is available at a of the recommended type to raise Yamaha dealer. it to the correct level. 5. Apply a thin coat of engine oil to To change the engine oil (with or...
  • Page 81 PERIODIC MAINTENANCE AND MINOR REPAIR Recommended engine oil: See page 9-1. Oil quantity: Without oil filter cartridge replace- ment: 3.50 L (3.70 US qt) (3.08 Imp.qt) With oil filter cartridge replacement: 3.70 L (3.91 US qt) (3.26 Imp.qt) ECA11620 CAUTION: 1.

  • Page 82: Final Gear Oil

    If any NOTE: oil level is sufficient. leakage is found, have a Yamaha deal- The oil level should be at the brim of the er check and repair the vehicle. In addi- ECA10400 filler hole.

  • Page 83: Coolant

    PERIODIC MAINTENANCE AND MINOR REPAIR 2. Remove the oil filler bolt and drain 6. Check the final gear case for oil EAU20070 Coolant bolt to drain the oil from the final leakage. If oil is leaking, check for The coolant level should be checked gear case.
  • Page 84 PERIODIC MAINTENANCE AND MINOR REPAIR If water has been added to the coolant, have a Yamaha dealer check the antifreeze content of the coolant as soon as possible, otherwise the effectiveness of the coolant will be reduced. EWA10380 WARNING Never attempt to remove the radiator 1.

  • Page 85: Cleaning The Air Filter Elements

    The air filter elements should be nance and lubrication chart. Have a filter case off. cleaned at the intervals specified in the Yamaha dealer change the coolant. periodic maintenance and lubrication chart. Clean the air filter elements more frequently if you are riding in unusually wet or dusty areas.
  • Page 86 PERIODIC MAINTENANCE AND MINOR REPAIR 7. Install the air filter element by fit- ting the projection on the air filter element into the holder in the air fil- ter case, then tightening the screws. ECA10480 CAUTION: Make sure that the air filter ele- ment is properly seated in the air filter case.

  • Page 87: Carburetors

    To prevent this adjustment. Therefore, all carburetor from occurring, the valve clearance adjustments should be left to a Yamaha must be adjusted by a Yamaha dealer dealer, who has the necessary profes- at the intervals specified in the periodic sional knowledge and experience.

  • Page 88: Tires

    PERIODIC MAINTENANCE AND MINOR REPAIR EAU32541 LOAD YOUR VEHICLE. Make sure Tire air pressure (measured on cold Tires that the total weight of the cargo, rid- tires): To maximize the performance, durabil- er, passenger, and accessories 0–90 kg (0–198 lb): ity, and safe operation of your motor- Front: (cowling, saddlebags, etc.

  • Page 89: Cast Wheels

    PERIODIC MAINTENANCE AND MINOR REPAIR in it, or if the sidewall is cracked, con- After extensive tests, only the EAU21992 Cast wheels tact a Yamaha dealer immediately and tires listed below have been ap- To maximize the performance, durabil- have the tire replaced. proved...

  • Page 90: Accessories And Replacement Parts

    Use of non- Yamaha-approved accessories or replacement parts may cause loss of handling stability and riding safety. Since Yamaha cannot control the quality of accessories or parts man- ufactured other companies, Yamaha cannot be held liable for 7-23...

  • Page 91: Clutch Lever

    If there is air in the hydraulic 2. To increase the brake lever free system, have a Yamaha dealer bleed play, turn the adjusting screw in di- the system before operating the motor- rection (a). To decrease the brake cycle.

  • Page 92: Adjusting The Rear Brake Light Switch

    Since the brake light switch is a compo- nent of the cruise control system, it EAU22430 Front brake pads must be adjusted by a Yamaha dealer, who has the necessary professional knowledge and experience. 1. Brake pad wear indicator groove...

  • Page 93: Checking The Brake And Clutch Fluid Levels

    PERIODIC MAINTENANCE AND MINOR REPAIR EAU22660 Clutch Use only the recommended quality Checking the brake and clutch brake fluid, otherwise the rubber fluid levels seals may deteriorate, causing leakage and poor braking or clutch Front brake performance. Recommended brake and clutch flu- DOT 4 brake fluid Refill with the same type of brake 1.

  • Page 94: Changing The Brake And Clutch Fluids

    Yamaha dealer clutch fluids cables check the cause. Have a Yamaha dealer change the The operation of all control cables and brake and clutch fluids at the intervals the condition of the cables should be specified in the NOTE after the periodic checked before each ride, and the ca- maintenance and lubrication chart.

  • Page 95: Checking And Lubricating The Throttle Grip And Cable

    PERIODIC MAINTENANCE AND MINOR REPAIR EAU23111 EAU23131 Recommended lubricant: Checking and lubricating the Checking and lubricating the Lithium-soap-based grease (all-pur- throttle grip and cable brake and shift pedals pose grease) The operation of the throttle grip should be checked before each ride. In addi- tion, the cable should be lubricated at the intervals specified in the periodic maintenance chart.

  • Page 96: Checking And Lubricating The Brake And Clutch Levers

    Recommended lubricant: EWA10730 Lithium-soap-based grease (all-pur- WARNING pose grease) If the sidestand does not move up and down smoothly, have a Yamaha dealer check or repair it. Recommended lubricant: Lithium-soap-based grease (all-pur- pose grease) 7-29...

  • Page 97: Lubricating The Rear Suspension

    If any damage is found or the front Check the inner tubes for scratches, fork does not operate smoothly, damage and excessive oil leakage. have a Yamaha dealer check or re- pair it. To check the operation 1. Place the vehicle on a level sur- face and hold it in an upright posi- tion.

  • Page 98: Checking The Steering

    2. Hold the lower ends of the front fork legs and try to move them for- ward and backward. If any free play can be felt, have a Yamaha dealer check or repair the steering. 7-31...

  • Page 99: Battery

    To charge the battery burns. Avoid any contact with Have a Yamaha dealer charge the bat- skin, eyes or clothing and al- tery as soon as possible if it seems to ways shield your eyes when have discharged.

  • Page 100: Replacing The Fuses

    If you do not have access to a 1. Cruise control fuse sealed-type (MF) battery charg- 2. Carburetor heater fuse er, have a Yamaha dealer 1. Main fuse 3. Auxiliary DC connector fuse 2. Spare main fuse charge your battery.
  • Page 101 Main fuse: check if the device operates. 30.0 A Cruise control fuse: 4. If the fuse immediately blows 10.0 A again, have a Yamaha dealer Carburetor heater fuse: check the electrical system. 10.0 A Auxiliary DC connector fuse: 5.0 A Auxiliary DC jack fuse: 5.0 A...

  • Page 102: Replacing The Headlight Bulb

    4. Install the bulb cover, and then from a lit headlight bulb, and do not connect the coupler. touch the bulb until it has cooled 5. Have a Yamaha dealer adjust the down. 1. Headlight bulb cover headlight beam if necessary.

  • Page 103: Replacing A Turn Signal Light Bulb Or The Tail/Brake Light Bulb

    PERIODIC MAINTENANCE AND MINOR REPAIR EAU24281 2. Remove the defective bulb by EAU24350 Replacing a turn signal light Supporting the motorcycle pushing it in and turning it counter- bulb or the tail/brake light bulb Since this model is not equipped with a clockwise.

  • Page 104: Troubleshooting

    The following troubleshooting charts represent quick and easy procedures for checking these vital systems your- self. However, should your motorcycle require any repair, take it to a Yamaha dealer, whose skilled technicians have the necessary tools, experience, and know-how to service the motorcycle properly.

  • Page 105: Troubleshooting Charts

    Remove the spark plugs and check the electrodes. The engine does not start. Have a Yamaha dealer check the vehicle. Check the battery. 4. Battery The engine turns over The battery is good.
  • Page 106 Start the engine. If the engine overheats again, have a The coolant level Yamaha dealer check and repair the cooling system. is OK. NOTE: If coolant is not available, tap water can be temporarily used instead, provided that it is changed to the recommended coolant as soon as possible.

  • Page 107: Motorcycle Care And Storage

    Cleaning the motorcycle towel, or soft absorbent cloth. quality plastic polishing com- 1. Rinse any dirt and degreaser off 4. Clean the seat with Yamaha Pro- pound after washing. with a garden hose, using only tectant or another high-quality vi- Do not use any harsh chemical enough pressure to do the job.

  • Page 108: Storage

    NOTE: since many contain abrasives that may mar the paint or protective finish. When Use a Yamaha Power Cable Luber and Operate the engine for several finished, start the engine and let it idle Yamaha Lube Zall or another high- minutes to insure the newly condi- for several minutes.
  • Page 109 MOTORCYCLE CARE AND STORAGE 6. If storing in a humid or salt-air at- mosphere, coat all exposed metal surfaces with a light film of oil. Do not apply oil to any rubber parts or the seat cover. 7. Remove the battery and fully charge it.

  • Page 110: Specifications

    SPECIFICATIONS Dimensions: Engine oil: Air filter: Overall length: Type: Air filter element: 2655 mm (104.5 in) YAMALUBE 4, SAE10W30 or SAE20W40 Dry element Overall width: Fuel: 900 mm (35.4 in) Recommended fuel: Overall height: Unleaded gasoline only 0° 10° 30° 50° 70° 90° 110° 130°F 1565 mm (61.6 in) Fuel tank capacity:...
  • Page 111 SPECIFICATIONS Transmission type: Size: Rim size: Constant mesh 5-speed 150/90B15M/C 74H 15M/C x MT4.00 Operation: Manufacturer/model: Front brake: Left foot operation DUNLOP/D404 Type: Gear ratio: Manufacturer/model: Dual disc brake 1st: BRIDGESTONE/G702G Operation: 43/17 (2.529) Loading: Right hand operation 2nd: Maximum load: Recommended fluid: 31/19 (1.632) 190 kg (419 lb)
  • Page 112 SPECIFICATIONS Charging system: Overdrive indicator light: Audio system fuse: 12 V, 1.7 W × 1 AC magneto 10.0 A Battery: Cruise control “SET” indicator light: Auxiliary DC connector fuse: 12 V, 1.7 W × 1 5.0 A Model: Cruise control “RES” indicator light: Auxiliary DC jack fuse: YTX20L-BS 12 V, 1.7 W ×...

  • Page 113: Consumer Information

    Record the key identification number, vehicle identification number and mod- el label information in the spaces pro- vided below for assistance when ordering spare parts from a Yamaha dealer or for reference in case the vehi- cle is stolen. KEY IDENTIFICATION NUMBER: 1.
  • Page 114 1. Model label The model label is affixed to the frame under the rider seat. (See page 3-13.) Record the information on this label in the space provided. This information will be needed when ordering spare parts from a Yamaha dealer. 10-2...

  • Page 115: Reporting Safety Defects

    If you believe that your vehicle has a defect which could cause a crash or could cause injury or death, you should immediately inform the National Highway Traffic Safety Administration (NHTSA) in addition to notifying Yamaha Motor Corporation, U.S.A. If NHTSA receives similar complaints, it may open an investigation, and if it finds that a safety defect exists in a group of vehicles, it may order a recall and remedy campaign.

  • Page 116: Motorcycle Noise Regulation

    CONSUMER INFORMATION EAU26560 Motorcycle noise regulation TAMPERING WITH NOISE CONTROL SYSTEM PROHIBITED: Federal law prohibits the following acts or the causing thereof: (1) The removal or rendering inoperative by any person other than for purposes of maintenance, repair, or replacement of any device or element of design incorporated into any new ve- hicle for the purpose of noise control prior to its sale or delivery to the ultimate purchaser or while it is in use or (2) the use of the vehicle after such device or element of design has been removed or rendered inoperative by any person.

  • Page 117: Maintenance Record

    CONSUMER INFORMATION EAU26632 Maintenance record Copies of work orders and/or receipts for parts purchased and installed on your vehicle will be required to document that maintenance has been completed in accordance with the emissions warranty. The chart below is printed only as a reminder that maintenance work is required.
  • Page 118 CONSUMER INFORMATION Maintenance Date of Servicing dealer Mileage Remarks interval service name and address 36000 mi (55000 km) or 54 months 40000 mi (61000 km) or 60 months 10-6...

  • Page 119: Yamaha Motor Corporation, U.s.a. Royal Star™ Venture Limited Warranty

    CONSUMER INFORMATION EAU26703 ® YAMAHA MOTOR CORPORATION, U.S.A. ROYAL STAR™ VENTURE LIMITED WARRANTY 10-7...
  • Page 120 CONSUMER INFORMATION 10-8...
  • Page 121 CONSUMER INFORMATION 10-9...
  • Page 122 INDEX Cruise control switches......3-8 Cruise control system ......3-5 Accessories and replacement parts..7-23 Labels, location of ........1-5 Air filter elements, cleaning....7-18 Audio settings (basic)......4-4 Dimmer switch ........3-7 Main switch/steering lock ......3-1 Audio settings (modes) ......4-6 Maintenance and lubrication, periodic..
  • Page 123 INDEX Sound control unit........4-3 Spark plugs, checking ......7-11 Specifications ......... 9-1 Speedometer unit ........3-4 Starter (choke) knob ......3-12 Starting and warming up a cold engine........... 6-1 Start switch ..........3-8 Steering, checking ........ 7-31 Steering, locking with a padlock ... 3-13 Storage ...........
  • Page 124 YAMAHA MOTOR CO., LTD. PRINTED ON RECYCLED PAPER PRINTED IN JAPAN 2006.05-0.3×1 CR...

This manual is also suitable for:

Venture xvz13tfmwVenture xvz13tfwcVenture xvz13tfmwc

Table of Contents