CRANKSHAFT
EAS00407
INSTALLING THE CRANKSHAFT
1. Install:
S crankshaft journal upper bearings 1
(into the upper crankcase)
NOTE:
S Align the projections a on the crankshaft jour-
nal upper bearings with the notches b in the
crankcase.
S Be sure to install each crankshaft journal up-
per bearing in its original place.
2. Install:
S timing chain 1
(onto the crankshaft sprocket)
S crankshaft assembly 2
NOTE:
S Pass the timing chain through the timing chain
cavity.
S To prevent the timing chain from falling into the
crankcase, fasten it with a wire.
EAS00410
INSTALLING THE BALANCER SHAFT
1. Install:
S balancer shaft
NOTE:
Align the punch mark a in the balancer shaft
drive gear with the punch mark b in the balanc-
er shaft driven gear.
4-86
ENG