CLUTCH RELEASE CYLINDER
Order
Removing the clutch release cylinder
Engine oil
Middle gear case cover, shift pedal
assembly, crankcase cover (left side)
1
Rubber cover
2
Clutch pipe clamps
3
Union bolt
4
Copper washers
5
Clutch release cylinder
Job/Part
CLUTCH
Q'ty
Remove the parts in the order listed.
NOTE:
Before removing the clutch release
cylinder or the master cylinder, drain the
clutch fluid from the entire clutch system.
Refer to "CHANGING THE ENGINE OIL"
in CHAPTER 3.
Refer to "STARTER CLUTCH AND
GENERATOR".
1
2
1
Refer to "INSTALLING THE CLUTCH
2
RELEASE CYLINDER".
1
For installation, reverse the removal
procedure.
4-41
ENG
12 Nm (1.2 mSkg)
25 Nm (2.5 mSkg)
Remarks