Setting Date And Time - Kyocera TASKalfa 420i Operation Manual

Setting Date and Time

Follow the steps below to set the local date and time at the place of installation.
When you send an E-mail using the transmission function, the date and time as set here will be printed in the
header of the E-mail message. Set the date, time and time difference from GMT of the region where the machine
is used.
NOTE:
If user login administration is enabled, you can only change the settings by logging in with
administrator privileges. If user login administration is disabled, the user authentication screen appears. Enter
a login user name and password, and press [Login]. Refer to Adding a User on page 11-5 for the default login
user name and password.
Be sure to set the time difference before setting the date and time.
If you change Date/Time setting, trial functions will be unavailable. For details, refer to Optional Functions on
page 8-75.
Date/Timer - Time Zone
Set time zone.
Select the location nearest you.
-12:00 International Date Line West
-11:00 Midway Island, Samoa
-10:00 Hawaii
-09:00 Alaska
-08:00 Pacific Time (US & Canada)
-07:00 Arizona
Status
Date/Timer - Date/Time
Set the date and time.
2008
Status
OPERATION GUIDE
Downloaded from www.Manualslib.com
Time Zone
Cancel
10 10
Year Month Day
10 10 31
Hour Minute Second
Cancel
manuals search engine
1
Press the System Menu key.
2
Press [
Time Zone.
3
Select the region.
NOTE:
Press [
4
Press [Off] or [On] of Summer Time and press [OK].
Summer Time
1/13
Off
NOTE:
If you select a region that does not utilize
On
summer time, the summer time setting screen will not
appear.
OK
08/08/2009 10:10
5
Press [Change] of Date/Time.
6
Set the date and time. Press [+] or [–] in each
setting.
7
Press [OK].
Off
OK
08/08/2009 10:10
Preparation before Use
], [Date/Timer] and then [Change] of
] or [ ] to view the next region.
2
2-11