Applications - Kyocera TASKalfa 420i Operation Manual

Default Setting (System Menu)

Applications

You can install and use applications that will make your day-to-day use of this machine more efficient.
Installing Applications
You can install new applications.
Use the procedure below to install an application.
1
Insert the USB memory containing the application to be installed into the USB memory slot (A1).
NOTE:
If Removable Memory is recognized. Displaying files. appears, press [No].
2
Press the System Menu key.
3
Press [ ] and then [Application].
NOTE:
If user login administration is disabled, the user authentication screen appears. Enter your login user
name and password and then press [Login]. For this, you need to login with administrator privileges. Refer to
Adding a User on page 11-5 for the default login user name and password.
4
Press [Add].
5
Select the application to be installed and press [Install].
You can view detailed information on the selected application by pressing [Detail].
6
When the confirmation screen appears, press [Yes].
Installation of the application begins. Depending on the application being installed, the installation may take
some time.
Once the installation ends, the original screen reappears.
7
To install another application, repeat steps 5 to 6.
8
To remove the USB memory, press [Remove Memory] and wait until the Removable Memory can be safely
removed message appears. Then remove the USB memory.
Activating/Deactivating Application
To use an application, set the application to Activate.
Use the procedure below to start using an application.
1
Press the System Menu key.
8-60
Downloaded from www.Manualslib.com manuals search engine
OPERATION GUIDE