Kyocera TASKalfa 420i Operation Manual page 142

Copying Functions
The procedure for using Booklet copying is explained below.
Ready to copy.
Booklet
Place original.
Original : ---
:
Zoom
100%
Paper : ---
Preview
Add Shortcut
Status
4-20
Downloaded from www.Manualslib.com
Original
Off
Binding
Left/Right
1-sided
Binding
>>Booklet
Top
2-sided
Finishing
>>Booklet
Binding
Left
Book
>>Booklet
Binding
Right
Binding
Top
Cancel
manuals search engine
1
Press the Copy key.
2
Place the originals on the platen.
3
Press [Layout/Edit] and then [Booklet].
4
Press [1-sided>>Booklet] to produce a booklet
Copies
from single-sided originals.
Press [2-sided>>Booklet] to produce a booklet
Off
from two-sided originals.
Cover
Off
Press [Book>>Booklet] to produce a booklet from
Saddle
Stitch an open book original.
Top Edge Top
Original
Orientation
OK
08/08/2009 10:10
5
If you selected [2-sided>>Booklet] or
[Book>>Booklet], choose the binding orientation in
Finishing.
If you selected [1-sided>>Booklet], choose the
binding orientation in Finishing.
6
If you choose [1-sided>>Booklet],
[2-sided>>Booklet], or [Book>>Booklet] you can
add the cover. Press [Cover], select [Cover] and
press [OK].
7
Press [Original Orientation] to choose orientation of
the originals, either [Top Edge Top] or [Top Edge
Left]. Then press [OK].
8
If the optional 3,000 sheet document finisher and
folding unit are installed, the [Saddle Stitch] option
is displayed.
To use saddle stitching, press [Saddle Stitch] and
then press [Bind and Fold]. You can saddle stitch
up to 16 sheets (64 pages).
9
Press [OK].
10
Platen and press the Start key. Copying begins.
NOTE:
When using the platen, be sure to place the
originals in page order.
If the originals are placed on the platen,
consecutively replace each original after pressing
the Start key.
After scanning all originals, press [Finish Scan] to
start copying.
OPERATION GUIDE