Interrupt Copy - Kyocera TASKalfa 420i Operation Manual

Basic Operation

Interrupt Copy

This function allows you to pause the current jobs in progress when you need to make copies immediately.
When interruption copy ends, the machine resumes the paused print jobs.
NOTE:
You can change the delay until interrupt copying is cancelled. Change the delay as required. For more
information, refer to Interrupt Clear Timer on page 8-50.
Ready for interrupt copy.
Copy Image
Place original.
Original : ---
Zoom : 100%
---
Paper :
Preview
Quick Setup
Status
3-16
Downloaded from www.Manualslib.com
Auto 100% Normal 0
Paper Zoom Density
Selection
2-sided 2 in 1 Off
>>2-sided
Duplex Combine Staple/Punch
Org./Paper/ Image Quality Layout/Edit
Finishing
manuals search engine
1
Press the Interrupt key.
Copies
1
Ready for interrupt copy. is displayed.
Shortcut 1
Shortcut 2
The current print job is temporarily interrupted.
Shortcut 3
Shortcut 4
Shortcut 5
Shortcut 6
Advanced
Setup
08/08/2009 10:10
2
Place the originals onto the machine for interrupt
copy, and configure the copy settings.
3
Press the Start key to start interrupt copying.
4
When interrupt copying ends, press the Interrupt
key.
The machine resumes the paused print jobs.
OPERATION GUIDE