Device/Communication - Kyocera TASKalfa 420i Operation Manual

Status / Job Cancel

Device/Communication

Configure the devices/lines installed or connected to this machine or check their status. You can also control
devices depending on their status.
Displaying Device/Communication Screen
The procedure for using the Device/Communication screen is explained below.
Check of Device Status
Status
Scanner
Ready.
Printer
Ready.
Removable Memory
Not connected.
Format
FAX Port 1
Dialing...
Line Off
FAX
Printing Jobs
Status
The items you can check are described below.
Scanner
The status of an original scanning in the document processor (optional) or the error information (paper jam,
opened cover, etc.) is displayed.
Printer
Error information such as paper jam, out of toner, or out of paper, and status such as waiting or printing are
displayed.
Hard Disk
The information such as formatting, overwriting for erasure, and error occurrence is displayed.
7-16
Downloaded from www.Manualslib.com
Hard Disk
Overwriting...
Remove
FAX Port 2
Receiving...
Manual RX Line Off
Log i-FAX
Device/
Sending Jobs Storing Jobs
Communication
manuals search engine
1
Press the Status/Job Cancel key.
2
Press [Device/Communication]
The screen to check the status or configure the
devices is displayed.
Check New FAX
Paper/Supplies
08/08/2009 10:10
OPERATION GUIDE