Loading Paper In The Cassettes - Kyocera TASKalfa 420i Operation Manual

Preparation before Use

Loading Paper in the Cassettes

The 2 standard cassettes will each hold plain paper, recycled paper or color paper.
Cassette holds up to 500 sheets (80 g/m
The following paper sizes are supported: Ledger, Legal, Oficio II, 8.5×13.5", Letter, Letter-R, Statement, A3,
B4, A4, A4-R, B5, B5-R, A5, Folio, 8K, 16K, and 16K-R.
IMPORTANT:
• You should not use inkjet printer paper or any paper with a special surface coating. (Such paper may cause
paper jams or other faults.)
• When using media types other than plain paper (such as recycled or colored paper), always specify the
media type setting. (Refer to Specifying Paper Size and Media Type for the Cassettes on page 2-26)
The cassettes can hold paper with weights up to 105 g/m
• Do not load paper that is heavier than 106 g/m
heavier than 106 g/m
2-20
Downloaded from www.Manualslib.com
2
).
2
.
manuals search engine
2
.
2
in the cassettes. Use the multi purpose tray for paper that is
1
Pull the cassette out toward you until it stops.
NOTE:
Do not pull out more than one cassette at a
time.
2
Using the paper length guide, move the plate to fit
the paper.
When loading A4 or smaller paper into cassette 1,
lift up the paper length guide. For B4 or larger
paper, lower the paper length guide.
NOTE:
Paper sizes are marked on the cassette.
3
Holding the paper width adjusting tab, move the
paper width guides to fit the paper.
OPERATION GUIDE