Kyocera TASKalfa 420i Operation Manual page 249

1
Press the System Menu key.
2
Press [Common Settings], [
3
Select the default resolution.
4
Press [OK].
Color Selection (Send/Store)
Select the default color mode for scanning documents. The available default settings are shown below.
Auto Color (Color/Gray)
Auto Color (Color/B & W)
Full Color
Grayscale
Black & White
Use the procedure below to select the default color mode.
1
Press the System Menu key.
2
Press [Common Settings], [
3
Select the default color mode.
4
Press [OK].
File Format
Select the default file type to send the scanned originals. The available default settings are shown below.
PDF
TIFF
JPEG
XPS
High Comp. PDF
NOTE:
Refer to page 5-12 for file formats.
OPERATION GUIDE
Downloaded from www.Manualslib.com
], [Next] of Function Defaults and then [Change] of Scan Resolution.
Color mode
Automatically recognize whether the document is color or black
and white, and scan color documents in Full Color and black and
white documents in Grayscale.
Automatically recognize whether the document is color or black
and white, and scan color documents in Full Color and black and
white documents in Black and White.
Scan document in full color.
Scan document in grayscale for smoother and finer finish.
Scan document in black and white. File size is smaller than Full
Color or Grayscale.
], [Next] of Function Defaults and then [Change] of Color Select.(Send/Store).
Item
Send files in PDF format.
Send files in TIFF format.
Send files in JPEG format.
Send files in XPS format.
Send files in High Comp. PDF format (refer to page 5-14).
manuals search engine
Default Setting (System Menu)
Description
Description
8
8-17