Copying - Kyocera TASKalfa 420i Operation Manual

Basic Operation

Copying

Follow the steps as below for basic copying.
Ready to copy.
Copy Image
Place original.
Original : ---
Zoom : 100%
Paper : ---
Preview
Quick Setup
Status
3-6
Downloaded from www.Manualslib.com
Auto 100% Normal 0
Paper Zoom Density
Selection
2-sided 2 in 1 Off
>>2-sided
Duplex Combine Staple/Punch
Org./Paper/ Image Quality Layout/Edit
Finishing
manuals search engine
1
Press the Copy key when the Copy key/indicator
is off.
NOTE:
If the touch panel is turned off, press the
Energy Saver key or the Power key and wait for the
machine to warm up.
2
Place the originals on the platen or in the optional
document processor.
NOTE:
For loading instructions, refer to Loading
Originals on page 2-30.
3
Check that [Auto] is selected of Paper Selection on
Copies
the touch panel. Paper that matches the size of the
original will be selected automatically.
Shortcut 1
Shortcut 2
To change the paper size, press, [Org./Paper/
Shortcut 3 Finishing], [Paper Selection] and select the desired
paper source.
Shortcut 4
Shortcut 5
NOTE:
Select paper size manually, if necessary,
Shortcut 6
instead of using automatic paper selection.
Advanced
Setup
08/08/2009 10:10
4
Use the numeric keys to enter the copy quantity.
Specify the desired number up to 999.
5
Press the Start key to start copying.
6
Remove the finished copies from the top tray.
OPERATION GUIDE