Kyocera TASKalfa 420i Operation Manual page 99

For send to folder (FTP)
Host Name*
Path
Login User Name
Login Password
Ready to send.
Place original.
Folder Path Entry
SMB
FTP
Add to Addr Book
Status
OPERATION GUIDE
Downloaded from www.Manualslib.com
Item
Host name or IP address of FTP server
Path to the receiving folder.
For example, \User\ScanData.
Otherwise the data will be saved in the home directory.
FTP server login user name
FTP server login password
* To specify a port number different from the default (21), enter using the format "host name:
port number" (e.g., FTPhostname:140).
To enter the IPv6 address, enclose the address in brackets [ ].
(e.g., [3ae3:9a0:cd05:b1d2:28a:1fc0:a1:10ae]:140)
Host Name
Path
Login
User Name
Login
Password
Specify the folder on the destination
computer.
Next Dest. Cancel
manuals search engine
Data to be entered
5
Upon completion of all entries, press [Connection
Destination
Test] to check the connection.
NOTE:
Connected. appears when connection to the
destination is correctly established. If Cannot connect.
appears, review the entry.
To specify another destination, go to the step 6. To
Connection
Test
specify only one destination, go to step 7.
OK
08/08/2009 10:10
6
Press [Next Dest.] and repeat steps 3 to 5 to
specify the destination. You can specify a
combined total of up to 10 FTP and SMB
destination folders.
NOTE:
When [Add to Addr Book] is displayed, the
entry is registered in the Address Book.
7
Press [OK] to register the entry in the destination
list.
Basic Operation
Max.
characters
Up to 64
3
characters
Up to 128
characters
Up to 64
characters
Up to 64
characters
3-27