Form Overlay - Kyocera TASKalfa 420i Operation Manual

Copying Functions

Form Overlay

Follow the steps as below for form overlay.
Ready to copy.

Form Overlay

Place original.
Original : ---
Zoom : 100%
Paper : ---
Preview
Add Shortcut
Status
Ready to copy.
Form Overlay - Select Form
Document Box
Box Name
Form for Form Overlay
Custom Box
Status
4-22
Downloaded from www.Manualslib.com
Forms Original
Density
(10 - 100)
Off
10
%
Select
Stored Form
Scan
New Form
Cancel
1/1
Cancel
manuals search engine
Copy the original images onto the form. Once you scan
and register the form, the form is overlaid onto the
original. You can also use a form that is already
registered in the machine's memory.
Copy
NOTE:
To register a form in advance, refer to Form for
Form Overlay Box on page 6-17 for details.
1
Press the Copy key.
2
Press [Layout/Edit] and then [Form Overlay].
3
Press [Scan New Form] to use the first page of
Copies
originals as a form.
NOTE:
Press [+] or [–] in [Density] to adjust the
density of the form. Choose from ten levels in 10%
increments.
None
Select
Form
OK
08/08/2009 10:10
To use the forms already registered, press [Select
Copies
Stored Form]. Press [Select Form] to display the
document boxes that store documents which can
be used as a form. Select the desired form from the
list and press [OK].
Up
Detail
NOTE:
To return to a higher level folder, press [Up].
Preview
Open
OK
08/08/2009 10:10
4
Press [OK].
5
Place the originals.
Place the original for the form on top of the other
originals. When using the optional document
processor, the first page of the originals should be
placed on the top.
6
Press the Start key to start copying.
OPERATION GUIDE