Mic With 1X100Ge Cfp Interface (Srx-Mic-1X100G-Cfp) - Juniper SRX5400 Manual

MIC with 1x100GE CFP Interface (SRX-MIC-1X100G-CFP)

Description
Software release
Cables and connectors
Supported slots
Weight
LEDs
Copyright © 2014, Juniper Networks, Inc.
You use MICs and MPCs to add different combinations of Ethernet interfaces to your
services gateway to suit the specific needs of your network. The SRX-MIC-1X100G-CFP
(see Figure 15 on page 25) can be installed in an MPC to add one 100-Gigabit Ethernet
CFP port.
Figure 15: SRX-MIC-1X100G-CFP
MIC with one CFP 100-Gigabit Ethernet port
Fits into MPC
Supports up to 100 Gbps of full-duplex traffic
Maximum configurable MTU: 9192 bytes
Junos OS Release 12.1X46-D10
One socket for a 100-Gigabit CFP transceiver.
Supported CFP transceivers:
100GBASE-LR4 (model number: SRX-CFP-100G-LR4)
100GBASE-SR10 (model number: SRX-CFP-100G-SR10)
Either slot in SRX5K-MPC
Approximately 1.6 lb (0.7 kg)
OK/FAIL LED, one bicolor:
Green–The MIC is operating normally.
Red–The MIC has failed and is not operating normally.
Off–The MIC is powered down.
LINK LED, single color:
Green–The link is active.
Off–No link.
MIC with 1x100GE CFP Interface (SRX-MIC-1X100G-CFP)
25