Ricoh MP C2504 Field Service Manual page 687

5. System Maintenance
Display contents
On the above screen, two programs, i.e., engine firmware and printer application are displayed.
(The screen may change depending on the firmware or application).
The display contents are as follows:
Display
ROM:
NEW:
The upper row corresponds to the module name, the lower row corresponds to the version number.
8. Select the module with the module selection button or 10 key pad operation. The selected
module is highlighted, and [Verify] and [Update] are displayed.
• Depending on the combination of modules to update, it may not be possible to select all of
them simultaneously.
<<Key or button operations>>
Keys or buttons to press
[Update] or [#] key
[Verify] button or [./*] key
9. Press the [Update] or [#] key, and perform software update.
678
Display installed module number / version information.
Display module number / version information in the card.
Update the ROM of the selected module.
Perform verification of the selected module.
Contents
Contents