6. Troubleshooting
Press the 3rd switch from the right on the size switch of paper
feed tray 2 when seen from the front of the machine (Done
after detaching paper feed tray 2)
Press the 4th switch from the right on the size switch of paper
feed tray 2 when seen from the front of the machine (Done
after detaching paper feed tray 2)
Pull out paper feed tray 2 from the machine.
Solution:
• Reconnect the connector.
• Replace the sensor.
• Replace the Paper Transport IOB.
• Replace the harness.
2nd Paper Feed Tray
Check the 2nd tray set sensor to see if there are any
defects.
Does not shift to right door open status
Target Part/SP No.:Right Door Open/Close Switch / SP5-803-026 (Right Door Open/Close
Sensor)
Manually press the referenced switch (Done after opening
the right door)
Open the right door
Solution:
• Reconnect the connector.
• Replace the sensor.
• Replace the Paper Transport IOB.
• Replace the harness.
1038
Cause verification
Cause verification
Problem Judgement
Parameter other than 00001101
Parameter other than 00001110
Parameter other than 00001111
Replace the switch for the pick-up arm.
Problem Judgement
1: Open
0: Close