Table of Contents
Advertisement
6.
Press [Next] three times.
7.
Press [Auto Erase Memory Setting].
8.
Press [On].
9.
Select the method of overwriting.
If you select [NSA] or [DoD], proceed to step 12.
If you select [Random Numbers], proceed to step 10.
10.
Press [Change].
11.
Enter the number of times that you want to overwrite using the number keys, and then
press [#].
12.
Press [OK]. Auto Erase Memory is set.
13.
Log out.
14.
Check the display and make sure that the overwrite erase icon appears.
15.
Check the overwrite erase icon.
The icon [1] is lit when there is temporary data to be overwritten, and blinks during overwriting.
The icon [2] is lit when there is no temporary data to be overwritten.
Security Settings
377
Advertisement
Table of Contents
Troubleshooting
