Ikesnoop; Ippool - D-Link DFL-260E Reference Manual

-srcif=<Interface>
-stat
-tunnel=<IPsecTunnel>
-tunnels
-verbose
<ip address>
<IPsecTunnel>

2.2.40. ikesnoop

Enable or disable IKE-snooping.
Description
Turn IKE on-screen snooping on/off. Useful for troubleshooting IPsec connections.
Usage
ikesnoop
Show IKE snooping status.
ikesnoop -on [<ip address>] [-verbose]
Enable IKE snooping.
ikesnoop -off
Disable IKE snooping.
Options
-off
-on
-verbose
<ip address>

2.2.41. ippool

Deprecated
(2014-05-27) Replaced by command ike -snoop. Deprecated commands may be
removed in future releases.
Chapter 2: Command Reference
Interface used to reach the remote endpoint.
Show verbose information.
IPsec interface.
Show information on configured tunnels.
Show verbose information.
IP address of remote SG/peer.
IPsec interface.
Turn IKE snooping off.
Turn IKE snooping on.
Enable IKE snooping with verbose output.
IP address to snoop.
57