D-Link DFL-260E Reference Manual page 206

SLBMaxSlots
SLBNetSize
SLBNewPort
SLBMonitorRoutingTable
SLBMonitorPing
SLBPingPollingInterval
SLBPingSamples
SLBPingMaxPollFails
SLBPingMaxAverageLatency
SLBMonitorTCP
SLBTCPPorts
SLBTCPPollingInterval
SLBTCPSamples
SLBTCPMaxPollFails
SLBTCPMaxAverageLatency
SLBMonitorHTTP
SLBHTTPPorts
SLBHTTPPollingInterval
SLBHTTPSamples
SLBHTTPMaxPollFails
SLBHTTPMaxAverageLatency
Chapter 3: Configuration Reference
Specifies maximum number of slots for IP and
network stickiness. (Default: 2048)
Specifies network size for network stickiness.
(Default: 24)
Rewrite destination port to this port. (Optional)
Routing table used for server monitoring. (Default:
main)
Enable monitoring using ICMP Ping packets.
(Default: No)
Delay in milliseconds between each ping interval.
(Default: 5000)
Specifies the number of attempts to use for
statistical calculations. (Default: 10)
Specifies the maximum number of failed ping
attempts until
unreachable. (Default: 2)
Specifies the max average latency for the sample
attempts. (Default: 800)
Enable monitoring using TCP handshakes. (Default:
No)
Specifies the ports that will be monitored.
Delay in milliseconds
handshake. (Default: 10000)
Specifies the number of attempts to use for
statistical calculations. (Default: 10)
Specifies the maximum number of failed TCP
attempts until
unreachable. (Default: 2)
Specifies the max average latency for the sample
attempts. (Default: 800)
Enable monitoring using HTTP requests. (Default:
No)
Specifies the ports that will be monitored. (Default:
80)
Delay in milliseconds between each monitor
interval. (Default: 10000)
Specifies the number of attempts to use for
statistical calculations. (Default: 10)
Specifies the maximum number of failed HTTP
attempts until
unreachable. (Default: 2)
Specifies the max average latency for the sample
206
host is considered
between each
host is considered
host is considered
to be
TCP
to be
to be