Dhcpv6Server - D-Link DFL-260E Reference Manual

3.25. DHCPv6Server

Description
A DHCPv6 Server determines a set of IPv6 addresses and host configuration parameters to hand
out to DHCPv6 clients attached to a given interface.
Properties
Index
Name
Interface
IPv6AddressPool
Domain
ValidLeaseTime
PreferredLeaseTime
DNS1
DNS2
SendUnicastOption
ClearUniversalLocalBit
RapidCommit
PreferenceConfigured
PreferenceValue
LogEnabled
LogSeverity
Chapter 3: Configuration Reference
The index of the object, starting at 1. (Identifier)
Specifies a symbolic name for the DHCPv6 Server
rule. (Identifier)
The source interface to listen for DHCPv6 requests
on. This can be a single interface or a group of
interfaces.
A range, group or network that the DHCP Server
will use as IPv6 address pool to give out DHCPv6
leases from.
Domain name used for DNS resolution. (Optional)
The length of time in seconds that an address
remains valid for sending and receiving packets.
When expired, the host is not allowed to use the
provided address any more and should acquire a
new one. (Default: 86400)
The length of time in seconds that an address
should be preferred to be used in new
communications. When expired, unless renewed,
the address becomes deprecated and should no
longer be used as a source address in new
communications. (Default: 66400)
IPv6 of the primary DNS server. (Optional)
IPv6 of the secondary DNS server. (Optional)
Enable sending of Unicast option to DHCPv6 client.
(Default: No)
Clear the universal/local bit in the IPv6 address
pool in case of /64 networks. (Default: No)
Enable respond
assignments and other resources on Solicit
request. (Default: No)
Enable Preference option sending in Advertise
message. (Default: No)
Preference Option value. (Default: 0)
Enable logging. (Default: Yes)
Specifies with what severity log events will be sent
153
with committed address