Remotemgmtssh - D-Link DFL-260E Reference Manual

3.104. RemoteMgmtSSH

Description
Configure a Secure Shell (SSH) Server to enable remote management access to the system.
Properties
Name
Interface
Port
AllowAuthMethodPassword
AllowAuthMethodPublicKey
AllowHostKeyDSA
AllowHostKeyRSA
AllowKexDH14
AllowKexDH1
AllowAES128
AllowAES192
AllowAES256
AllowBlowfish
Allow3DES
AllowMACSHA1
AllowMACMD5
AllowMACSHA196
AllowMACMD596
Banner
MaxSessions
SessionIdleTime
LoginGraceTime
Chapter 3: Configuration Reference
Specifies a symbolic name for the SSH server.
(Identifier)
Specifies the interface for which remote access is
granted.
The listening port for the SSH server. (Default: 22)
Allow password client authentication. (Default:
Yes)
Allow public key client authentication. (Default:
Yes)
Allow DSA public key algorithm. (Default: Yes)
Allow RSA public key algorithm. (Default: Yes)
Allow Diffie-Hellman Group 14 key exchange
algorithm. (Default: Yes)
Allow Diffie-Hellman Group 1 key exchange
algorithm. (Default: Yes)
Allow AES-128 encryption algorithm. (Default: Yes)
Allow AES-192 encryption algorithm. (Default: Yes)
Allow AES-256 encryption algorithm. (Default: Yes)
Allow Blowfish encryption algorithm. (Default: Yes)
Allow 3DES encryption algorithm. (Default: Yes)
Allow SHA1 integrity algorithm. (Default: Yes)
Allow MD5 integrity algorithm. (Default: No)
Allow SHA1-96 integrity algorithm. (Default: Yes)
Allow MD5-96 integrity algorithm. (Default: No)
Specifies the greeting message to display when
the user logs in. (Optional)
The maximum number of clients that can be
connected at the same time. (Default: 5)
The number of seconds a user can be idle before
the session is closed. (Default: 1800)
When the user has supplied the username, the
277