Remotemgmthttp - D-Link DFL-260E Reference Manual

3.100. RemoteMgmtHTTP

Description
Configure HTTP/HTTPS management to enable remote management to the system.
Properties
Name
Interface
HTTP
HTTPS
AuthSource
AuthOrder
LocalUserDatabase
AccessLevel
RadiusServers
RadiusMethod
ChallengeExpire
PrimaryRetryInterval
AdminGroups
AuditGroups
Network
Comments
Chapter 3: Configuration Reference
Specifies a symbolic name for the object.
(Identifier)
Specifies the interface for which remote access is
granted.
Enable remote management via HTTP. (Default:
No)
Enable remote management via HTTPS. (Default:
No)
Optionally enable authentication from an external
source. Note that a Local User Database must
ALWAYS be configured to prevent administrative
lockout in cases where the external source may not
be available. (Default: LocalOnly)
Specifies if the local database should be queried
before or after the external database. (Default:
LocalLast)
Specifies the local user database to use for login.
Optionally restrict the access level of users
authenticated by the local database. (Default:
Admin)
Specifies the authentication servers that will be
used to authenticate users matching this rule.
Specifies the authentication method used for
encrypting the user password. (Default: PAP)
How long, in seconds, before RADIUS challenge
expires. (Default: 160)
How many seconds to wait before trying to use the
primary server again if it has failed. (Default: 0)
Restricts administration access to specific user
groups. (Optional)
Restricts auditing access to specific user groups.
(Optional)
Specifies the network for which remote access is
granted.
Text describing the current object. (Optional)
272