D-Link DFL-260E Reference Manual page 261

GroupingNetworkSize
Dynamic
PrecedenceMin
PrecedenceDefault
PrecedenceMax
Comments
Chapter 3: Configuration Reference
If users are grouped according to source or
destination network, the size of the network has to
be specified by this setting. (Default: 0)
Enable dynamic balancing of groups. (Default: No)
Specifies the lowest allowed precedence for traffic
in this pipe. If a packet with a lower precedence
enters, its precedence is raised to this value.
(Default: 0)
Specifies the default precedence for the pipe. If a
packet enters this pipe without a set precedence, it
gets assigned this value. Should be higher than or
equal to the minimum precedence. (Default: 0)
Specifies the highest allowed precedence for traffic
in this pipe. If a packet with a higher precedence
enters, its precedence is lowered to this value.
Should be higher than or equal to the default
precedence. (Default: 7)
Text describing the current object. (Optional)
261