D-Link DFL-260E Reference Manual page 225

IP6OPT_JUMBO
IP6OPT_RA
IP6OPT_HA
IP6OPT_OTH
IP6_RH0
IP6_RH2
IP6_RHOther
IP6OnLocalUnrecognizedHdr
LogCheckSumErrors
LogNonIPv4IPv6
LogReceivedTTL0
LogOnForwardTTL0
Log0000Src
Block0Net
Block127Net
BlockMulticastSrc
TTLMin
TTLOnLow
TTLMinMulticast
TTLOnLowMulticast
DefaultTTL
LayerSizeConsistency
Chapter 3: Configuration Reference
Validate jumbogram
ValidateLog)
Validate Router Alert packets. (Default: Ignore)
Validate Home Address option packets. (Default:
Ignore)
Validate unknown
RFC2460Log)
Validate routing header type 0 option. (Default:
RFC5095NoSupportLog)
Validate routing header type 2 option. (Default:
RFC2460NoSupportLog)
Validate routing header other than type 0 or 2
option. (Default: RFC2460NoSupportLog)
How to handle packets destined to the SGW with
unrecognized IPV6 headers. (Default: DropLog)
Log IP packets with bad checksums. (Default: Yes)
Log occurrences of non-IPv4/IPv6 packets. (Default:
Yes)
Log received packets with TTL=0; this should never
happen! (Default: Yes)
Log any attempts of forwarding IPv4 packets with
TTL=0 destined for outside the firewall; this should
never happen! (Default: DropLog)
Log invalid 0.0.0.0 source address. (Default: Drop)
Block 0.* source addresses. (Default: DropLog)
Block 127.* source addresses. (Default: DropLog)
Block multicast
(224.0.0.0--239.255.255.255). (Default: DropLog)
The minimum IP Time-To-Live value accepted on
receipt. (Default: 3)
What action to take on too low unicast TTL values.
(Default: DropLog)
The minimum IP multicast Time-To-Live value
accepted on receipt. (Default: 3)
What action to take on too low multicast TTL
values. (Default: DropLog)
The default IP Time-To-Live of packets originated
by the firewall (32-255). (Default: 255)
TCP/UDP/ICMP/etc layer data and header sizes
matching lower layer size information. (Default:
ValidateLogBad)
225
packets. (Default:
option types. (Default:
source addresses