L2Tpclient - D-Link DFL-260E Reference Manual

3.69. L2TPClient

Description
A PPTP/L2TP client interface is a PPP (Point-to-Point Protocol) tunnel over an existing IP network.
Its IP address and DNS servers are dynamically assigned.
Properties
Name
IP
Network
RemoteEndpoint
TunnelProtocol
OriginatorIPType
OriginatorIP
DNS1
DNS2
Username
Password
PPPAuthNoAuth
PPPAuthPAP
PPPAuthCHAP
PPPAuthMSCHAP
PPPAuthMSCHAPv2
MPPENone
Chapter 3: Configuration Reference
Specifies a symbolic name for the interface.
(Identifier)
The host name to store the assigned IP address in,
if this network object exists and have a value other
then 0.0.0.0 the PPTP/L2TP client will try to get that
one from the PPTP/L2TP server as preferred IP.
(Optional)
The network from which traffic should be routed
into the tunnel.
The IP address of the L2TP/PPTP server.
Specifies if PPTP or L2TP should be used for this
tunnel. (Default: PPTP)
Specifies what IP address to use as source IP in e.g.
NAT. (Default: LocalInterface)
Manually specified originator IP address to use as
source IP in e.g. NAT.
IP of the primary DNS server. (Optional)
IP of the secondary DNS server. (Optional)
Specifies the username to use for this PPTP/L2TP
interface.
The password to use for this PPTP/L2TP interface.
Allow no authentication for this tunnel. (Default:
No)
Use PAP authentication protocol for this tunnel.
User name and password are sent in plaintext.
(Default: Yes)
Use CHAP authentication protocol for this tunnel.
(Default: Yes)
Use MS-CHAP authentication protocol for this
tunnel. (Default: Yes)
Use MS-CHAP v2 authentication protocol for this
tunnel. (Default: Yes)
Allow authentication
Point-to-Point Encryption (MPPE). (Default: Yes)
227
without Microsoft