Logreceiversyslog; Logreceivermessageexception - D-Link DFL-260E Reference Manual

3.83. LogReceiverSyslog

Description
A Syslog receiver is used to receive log events from the system in the standard Syslog format.
Properties
Name
IPAddress
Port
Facility
Hostname
RFC5424
LogSeverity
RoutingTable
Comments

3.83.1. LogReceiverMessageException

The definitions here are the same as in Section 3.40.1, "LogReceiverMessageException" .
Chapter 3: Configuration Reference
Specifies a symbolic name for the log receiver.
(Identifier)
Specifies the IP address of the log receiver.
Specifies the port number of the log service.
(Default: 514)
Specifies what facility is used when logging.
(Default: local0)
Specifies a unique hostname. If not configured, the
IP address of the sending interface will be sent as
hostname. (Optional)
Send Syslog messages according to RFC5424.
(Default: No)
Specifies with what severity log events will be sent
to the specified log receivers. (Optional; Default:
Emergency,Alert,Critical,Error,Warning,Notice,Info)
Specifies the routing table the clients host route
should be added to. (Default: main)
Text describing the current object. (Optional)
247