Cpuid - D-Link DFL-260E Reference Manual

List connections.
connections
Same as "connections -show".
connections -close [-all] [-srciface=<interface>]
Close connections.
Options
-all
-close
-destiface=<interface>
-destip=<ip address>
-destport=<port>
-ipver={IPV6 | IPV4}
-num=<n>
-protocol=<name/num>
-show
-srciface=<interface>
-srcip=<ip address>
-srcport=<port>
-verbose

2.2.16. cpuid

Display info about the cpu.
Description
Display the make and model of the machine's CPU.
Usage
cpuid
[-protocol=<name/num>] [-srcport=<port>]
[-destport=<port>]
[-destiface=<interface>] [-ipver={IPV6 | IPV4}]
[-srcip=<ip address>] [-destip=<ip address>]
[-protocol=<name/num>] [-srcport=<port>]
[-destport=<port>]
Chapter 2: Command Reference
Mark all connections.
Close all connections that match the filter
expression. (Admin only)
Filter on destination interface.
Filter on destination IP address.
Filter on TCP/UDP destination port.
Filter on IP version.
Limit list to <n> connections. (Default: 20)
Filter in IP protocol.
Show connections.
Filter on source interface.
Filter on source IP address.
Filter on TCP/UDP source port.
Verbose (more information).
42