Hwmsettings - D-Link DFL-260E Reference Manual

3.51. HWMSettings

Description
General settings for Hardware Monitoring
Properties
EnableSensors
SensorPollInterval
MemoryPollInterval
MemoryUsePercent
MemoryLogRepetition
MemoryAlertLevel
MemoryCriticalLevel
MemoryWarningLevel
Note
This object type does not have an identifier and is identified by the name of the type
only. There can only be one instance of this type.
Chapter 3: Configuration Reference
Enable/disable all HWM functionality. (Default: No)
Sensor polling interval. (Default: 500)
Memory polling interval in minutes. (Default: 15)
Should mem monitor use percentage as unit for
monitoring, else it is megabyte. (Default: Yes)
Should a log message be sent for each poll result
that is in the Alert, Critical or Warning level, or
should a log message only be sent when a new
level is reached. (Default: No)
Alert log message if free memory is below this
value, disable by using 0. (Default: 0)
Critical log message if free memory is below this
value, disable by using 0. (Default: 0)
Warning log message if free memory is below this
value, disable by using 0. (Default: 0)
188