Pipe - D-Link DFL-260E Reference Manual

3.91. Pipe

Description
A pipe defines basic traffic shaping parameters. The pipe rules then determines which traffic
goes through which pipes.
Properties
Name
LimitKbpsTotal
LimitPPSTotal
LimitKbps0
LimitPPS0
LimitKbps1
LimitPPS1
LimitKbps2
LimitPPS2
LimitKbps3
LimitPPS3
LimitKbps4
LimitPPS4
LimitKbps5
LimitPPS5
LimitKbps6
LimitPPS6
LimitKbps7
Chapter 3: Configuration Reference
Specifies a symbolic name for the pipe. (Identifier)
Total bandwidth limit for this pipe in kilobits per
second. (Optional)
Total packet per second limit for this pipe.
(Optional)
Specifies the bandwidth limit in kbps for
precedence 0 (the lowest precedence). (Optional)
Specifies the packet per second limit for
precedence 0 (the lowest precedence). (Optional)
Specifies the bandwidth limit in kbps for
precedence 1. (Optional)
Specifies the packet per second limit for
precedence 1. (Optional)
Specifies the bandwidth limit in kbps for
precedence 2. (Optional)
Specifies the packet per second limit for
precedence 2. (Optional)
Specifies the bandwidth limit in kbps for
precedence 3. (Optional)
Specifies the packet per second limit for
precedence 3. (Optional)
Specifies the bandwidth limit in kbps for
precedence 4. (Optional)
Specifies the packet per second limit for
precedence 4. (Optional)
Specifies the bandwidth limit in kbps for
precedence 5. (Optional)
Specifies the packet per second limit for
precedence 5. (Optional)
Specifies the bandwidth limit in kbps for
precedence 6. (Optional)
Specifies the packet per second limit for
precedence 6. (Optional)
Specifies the bandwidth limit in kbps for
259