Multicastpolicy - D-Link DFL-260E Reference Manual

Comments

3.63.3. MulticastPolicy

Description
Multiplex Static Address Translation. The Multicast rule is used to achieve duplication and
forwarding of packets through more than one interface.
Properties
Index
Name
RequireIGMP
MultiplexArgument
MultiplexAllToOne
SourceInterface
DestinationInterface
SourceNetwork
DestinationNetwork
SourceGeoFilter
DestinationGeoFilter
Service
Schedule
Note
If no Index is specified when creating an instance of this type, the object will be placed
last in the list and the Index will be equal to the length of the list.
Chapter 3: Configuration Reference
to the specified log receivers. (Default: Default)
Text describing the current object. (Optional)
The index of the object, starting at 1. (Identifier)
Specifies a symbolic name for the policy.
Multicast traffic must have been requested using
IGMP before it is forwarded. (Default: Yes)
Specifies how the traffic should be forwarded and
translated.
Rewrite all destination IPs to a single IP. (Default:
No)
Specifies the name of the receiving interface to be
compared to the received packet.
Specifies the destination interface to be compared
to the received packet.
Specifies the sender span of IP addresses to be
compared to the received packet.
Specifies the span of IP addresses to be compared
to the destination IP of the received packet.
Specifies the country filter to be compared against
the sender Geolocation of the received packet.
(Optional)
Specifies the country filter to be compared against
the destination Geolocation of the received packet.
(Optional)
Specifies a service that will be used as a filter
parameter when matching traffic with this rule.
By adding a schedule to a rule, the firewall will only
allow that rule to trigger at those designated times.
211