TLSRootCert
HTTPInspection
HTTPAllowUnknownProtocols
SourceInterface
DestinationInterface
SourceNetwork
DestinationNetwork
SourceGeoFilter
DestinationGeoFilter
Service
Schedule
LogEnabled
LogSeverity
Comments
Note
If no Index is specified when creating an instance of this type, the object will be placed
last in the list and the Index will be equal to the length of the list.
Chapter 3: Configuration Reference
Specifies the root certificates. (Optional)
Enables HTTP protocol validation and logging of
URLs. (Default: No)
Allow non-HTTP protocols to pass through without
inspection. (Default: No)
Specifies the name of the receiving interface to be
compared to the received packet.
Specifies the destination interface to be compared
to the received packet.
Specifies the sender span of IP addresses to be
compared to the received packet.
Specifies the span of IP addresses to be compared
to the destination IP of the received packet.
Specifies the country filter to be compared against
the sender Geolocation of the received packet.
(Optional)
Specifies the country filter to be compared against
the destination Geolocation of the received packet.
(Optional)
Specifies a service that will be used as a filter
parameter when matching traffic with this rule.
By adding a schedule to a rule, the firewall will only
allow that rule to trigger at those designated times.
(Optional)
Enable logging. (Default: Yes)
Specifies with what severity log events will be sent
to the specified log receivers. (Default: Default)
Text describing the current object. (Optional)
203