Linkmonitor - D-Link DFL-260E Reference Manual

3.78. LinkMonitor

Description
The Link Monitor allows the system to monitor one or more hosts and take action if they are
unreachable.
Properties
Action
Addresses
MaxLoss
PingInterval
InitGracePeriod
RoutingTable
UseSharedIP
Comments
Note
If no Index is specified when creating an instance of this type, the object will be placed
last in the list and the Index will be equal to the length of the list.
Chapter 3: Configuration Reference
Specifies what action the system should take.
Specifies the addresses that should be monitored.
A single host is considered unreachable if this
number of consecutive ping responses to that host
are not replied to. (Default: 7)
Milliseconds between each monitor attempt.
(Default: 250)
Do not allow triggering of the link monitor for this
number of seconds after the last reconfiguration.
(Default: 45)
Routing table used for link monitoring. (Default:
main)
Use the shared IP of an HA cluster instead of the
private IP of the node. (Default: No)
Text describing the current object. (Optional)
241