D-Link DFL-260E Reference Manual page 133

RAReachableTime
RARetransTimer
RAManagedFlag
RAOtherConfigFlag
RACurHopLimit
RALinkMTU
RAValidLifetime
RAPreferredLifetime
RAOnLinkFlag
RAAutonomousFlag
Note
This object type does not have an identifier and is identified by the name of the type
only. There can only be one instance of this type.
Chapter 3: Configuration Reference
The value to be placed in the Reachable Time field
in the Router Advertisement messages SGW. The
value zero means unspecified. (Default: 0s).
(Default: 0)
The value to be placed in the Retrans Timer field in
the Router Advertisement messages sent by the
SGW. The value zero means unspecified. (Default:
0s). (Default: 0)
Indicates that addresses are available via DHCPv6.
(Default: False). (Default: No)
Indicates that other configuration information is
available via DHCPv6. (Default: False). (Default: No)
The default value to be placed in the Cur Hop Limit
field in the Router Advertisement messages sent
by the SGW. The value zero means unspecified.
(Default: 64). (Default: 64)
The value to be placed in MTU options sent. A
value of zero indicates that no MTU options are
sent. (Default: 0). (Default: 0)
The value to be placed in the Valid Lifetime in the
Prefix Information option. The value of 999999999
represents infinity. (Default: 2592000s). (Default:
2592000)
The value to be placed in the Preferred Lifetime in
the Prefix Information option. The value of
999999999 represents infinity. (Default: 604800s).
(Default: 604800)
Indicates that the advertised prefix can be used for
on-link determination. (Default: True). (Default:
Yes)
Indicates that the advertised prefix can be used for
stateless address configuration. (Default: True).
(Default: Yes)
133