Piperule - D-Link DFL-260E Reference Manual

3.92. PipeRule

Description
A Pipe Rule determines traffic shaping policy - which Pipes to use - for one or more types of
traffic with the same granularity as the standard ruleset.
Properties
Index
Name
SourceInterface
SourceNetwork
DestinationInterface
DestinationNetwork
Service
Schedule
ForwardChain
ReturnChain
Precedence
FixedPrecedence
Comments
Note
If no Index is specified when creating an instance of this type, the object will be placed
last in the list and the Index will be equal to the length of the list.
Chapter 3: Configuration Reference
The index of the object, starting at 1. (Identifier)
Specifies a symbolic name for the object.
(Optional)
Specifies the name of the receiving interface to be
compared to the received packet.
Specifies the sender span of IP addresses to be
compared to the received packet.
Specifies the destination interface to be compared
to the received packet.
Specifies the span of IP addresses to be compared
to the destination IP of the received packet.
Specifies a service that will be used as a filter
parameter when matching traffic with this rule.
By adding a schedule to a rule, the firewall will only
allow that rule to trigger at those designated times.
(Optional)
Specifies one or more pipes to be used for forward
traffic. (Optional)
Specifies one or more pipes to be used for return
traffic. (Optional)
Specifies what precedence should be assigned to
the packets before sent into a pipe. (Default:
FromPipe)
Specifies the fixed precedence.
Text describing the current object. (Optional)
262