Serviceicmp - D-Link DFL-260E Reference Manual

3.113. ServiceICMP

Description
An ICMP Service is an object definition representing ICMP traffic with specific parameters.
Properties
Name
MessageTypes
EchoRequest
EchoRequestCodes
DestinationUnreachable
DestinationUnreachableCodes
Redirect
RedirectCodes
ParameterProblem
ParameterProblemCodes
EchoReply
EchoReplyCodes
SourceQuenching
SourceQuenchingCodes
TimeExceeded
TimeExceededCodes
ForwardICMPErrors
EnableIPv4PathMTUDiscovery
Chapter 3: Configuration Reference
Specifies a symbolic name for the service.
(Identifier)
Specifies the ICMP message types that are
applicable to this service. (Default: All)
Enable matching of Echo Request messages.
(Default: No)
Specifies which Echo Request message codes
should be matched. (Default: 0-255)
Enable matching of Destination Unreachable
messages. (Default: No)
Specifies which Destination Unreachable message
codes should be matched. (Default: 0-255)
Enable matching of Redirect messages. (Default:
No)
Specifies which Redirect message codes should be
matched. (Default: 0-255)
Enable matching of Parameter Problem messages.
(Default: No)
Specifies which Parameter Problem message codes
should be matched. (Default: 0-255)
Enable matching of Echo Reply messages. (Default:
No)
Specifies which Echo Reply message codes should
be matched. (Default: 0-255)
Enable matching of Source Quenching messages.
(Default: No)
Specifies which Source Quenching message codes
should be matched. (Default: 0-255)
Enable matching of Time Exceeded messages.
(Default: No)
Specifies which Time Exceeded message codes
should be matched. (Default: 0-255)
Allow ICMP errors for active connections to be
forwarded through the system. (Default: No)
Path MTU Discovery allows communicating
291