D-Link DFL-260E Reference Manual page 202

VoIP
VoIP_Policy
FTPControl
FTPAllowServerPassive
FTPServerPorts
FTPAllowClientActive
FTPClientPorts
FTPAllowUnknownCommands
FTPAllowSITEEXEC
FTPMaxLineLength
FTPMaxCommandRate
FTPAllow8BitStrings
FTPAllowResumeTransfer
TFTPControl
TFTPAllowedCommands
TFTPRemoveOptions
TFTPAllowUnknownOptions
TFTPMaxBlocksize
TFTPMaxFileTransferSize
TFTPBlockDirectoryTraversal
PPTPControl
PPTPEchoTimeout
PPTPIdleTimeout
TLSControl
TLSHostCert
Chapter 3: Configuration Reference
Voice over IP. (Default: No)
Selects preconfigured VoIP Profile.
Enables FTP protocol specific settings. (Default: No)
Allow server to use passive mode (unsafe for
server). (Default: Yes)
Server data ports. (Default: 1024-65535)
Allow client to use active mode (unsafe for client).
(Default: Yes)
Client data ports. (Default: 1024-65535)
Allow unknown commands. (Default: No)
Allow SITE EXEC. (Default: No)
Maximum line length in control channel. (Default:
256)
Maximum number of commands per second.
(Default: 20)
Allow 8-bit strings in control channel. (Default: Yes)
Allow RESUME even in case of content scanning.
(Default: No)
Enables TFTP protocol specific settings. (Default:
No)
Specifies allowed commands. (Default: ReadWrite)
Remove option part from request packet. (Default:
No)
Allow unknown options in request packet. (Default:
No)
Max value for the blksize option. (Optional)
Max size for transferred file. (Optional)
Prevent directory traversal (consecutive dots in
filenames). (Default: No)
Enables TFTP protocol specific settings. (Default:
No)
Specifies idle timeout for Echo messages in the
PPTP tunnel. (Default: 0)
SPecifies idle timeout for user traffic in the PPTP
tunnel. (Default: 0)
Enables TFTP protocol specific settings. (Default:
No)
Specifies the host certificate.
202