D-Link DFL-260E Reference Manual page 311

HTTPBanners
RealmString
HostCertificate
RootCertificate
PPPAuthNoAuth
PPPAuthPAP
PPPAuthCHAP
PPPAuthMSCHAP
PPPAuthMSCHAPv2
IdleTimeout
SessionTimeout
UseServerTimeouts
MultipleUsernameLogins
ReplaceIdleTime
AccountingServers
PrimaryRetryIntervalAcc
BytesSent
PacketsSent
BytesReceived
PacketsReceived
Chapter 3: Configuration Reference
HTTP Authentication HTML Banners. (Default:
Default)
The string that is presented as a part of the 401 -
Authentication Required message. (Optional)
Specifies the host certificate that the firewall sends
to the client. Only RSA certificates are supported.
Specifies the root certificate that was used to sign
the host certificate. Only RSA certificates are
supported. (Optional)
Allow no authentication. (Default: No)
Use PAP authentication protocol. User name and
password are sent in plaintext. (Default: Yes)
Use CHAP authentication protocol. (Default: Yes)
Use MS-CHAP authentication protocol. (Default:
Yes)
Use MS-CHAP v2 authentication protocol. (Default:
Yes)
A successfully authenticated user will be logged
out automatically after this many seconds, if no
traffic has been received from the user's IP address.
(Default: 1800)
A successfully authenticated user will be logged
out automatically after this many seconds, even if
traffic has been received from the user's IP address.
(Optional)
Use timeouts received from the authentication
server. If no values are received, the manually
specified values will be used. (Default: No)
Specifies how multiple username logins will be
handled. (Default: AllowMultiple)
Replace existing user if idle for more than this
number of seconds. (Default: 10)
Specifies the accounting servers that will be used
to report user usage matching this rule. (Optional)
How many seconds to wait before trying to use the
primary server again if it has failed. (Default: 0)
Enable reporting of the number of bytes sent by
the user. (Default: Yes)
Enable reporting of the number of packets sent by
the user. (Default: Yes)
Enable reporting of the number of bytes received
by the user. (Default: Yes)
Enable reporting of the number of packets
311