Routingtable; Route - D-Link DFL-260E Reference Manual

3.110. RoutingTable

Description
The system has a predefined main routing table. Alternate routing tables can be defined by the
user.
Properties
Name
Ordering
RemoveInterfaceIPRoutes
Comments

3.110.1. Route

Description
A route defines what interface and gateway to use in order to reach a specified network.
Properties
Name
Interface
Gateway
LocalIP
Network
BroadcastFwd
RouteMonitor
MonitorLinkStatus
Chapter 3: Configuration Reference
Specifies a symbolic name for the routing table.
(Identifier)
Specifies how a route lookup is done in a named
routing table. (Default: Only)
Removes the interface routes. Makes the firewall
completely transparent. (Default: No)
Text describing the current object. (Optional)
Specifies a symbolic name for the object.
(Optional)
Specifies which interface packets destined for this
route shall be sent through.
Specifies the IP address of the next router hop used
to reach the destination network. If the network is
directly connected to the firewall interface, no
gateway address is specified. (Optional)
The IP address specified here will be automatically
published on the corresponding interface. This
address will also be used as the sender address in
ARP queries. If no address is specified, the firewall's
interface IP address will be used. (Optional)
Specifies the network address for this route.
By default, this traffic is dropped. (Default: No)
Specifies if this route should be monitored for
route changes for route failover purposes. (Default:
No)
Mark the route as down if the interface link status
changes to down. (Default: No)
285