Idprule; Idpruleaction - D-Link DFL-260E Reference Manual

3.54. IDPRule

Description
An IDP Rule defines a filter for matching specific network traffic. When the filter criterion is met,
the IDP Rule Actions are evaluated and possible actions taken.
Properties
Index
Name
SourceInterface
SourceNetwork
DestinationInterface
DestinationNetwork
Service
Schedule
InsertionEvasion
URIIllegalUTF8
URIIllegalHex
URIDoubleEncode
Comments

3.54.1. IDPRuleAction

Note
If no Index is specified when creating an instance of this type, the object will be placed
last in the list and the Index will be equal to the length of the list.
Chapter 3: Configuration Reference
The index of the object, starting at 1. (Identifier)
Specifies a symbolic name for the rule. (Optional)
Specifies the name of the receiving interface to be
compared to the received packet.
Specifies the sender span of IP addresses to be
compared to the received packet.
Specifies the destination interface to be compared
to the received packet.
Specifies the span of IP addresses to be compared
to the destination IP of the received packet.
Specifies a service that will be used as a filter
parameter when matching traffic with this rule.
By adding a schedule to a rule, the firewall will only
allow that rule to trigger at those designated times.
(Optional)
Protect against insertion/evastion attacks. (Default:
Yes)
Specifies what action to take if invalid UTF-8
characters are seen in a HTTP URI. (Default: Log)
Specifies what action to take when invalid
hexencoding (%xx) is seen in a HTTP URI. (Default:
DropLog)
Specifies what action to take when seeing double
encoded characters in a HTTP URI. (Default: Ignore)
Text describing the current object. (Optional)
191