Eventreceiversnmp2C; Logreceivermessageexception - D-Link DFL-260E Reference Manual

3.40. EventReceiverSNMP2c

Description
A SNMP2c event receiver is used to receive SNMP events from the system.
Properties
Name
IPAddress
Port
Community
RepeatCount
SNMP2cIfTraps
LogSeverity
RoutingTable
Comments

3.40.1. LogReceiverMessageException

Description
A log message exception is used to override the severity filter in the log receiver.
Properties
LogCategory
LogID
LogType
LogSeverity
Comments
Note
If no Index is specified when creating an instance of this type, the object will be placed
last in the list and the Index will be equal to the length of the list.
Chapter 3: Configuration Reference
Specifies a symbolic name for the log receiver.
(Identifier)
Destination IP address.
Destination port. (Default: 162)
Community string. (Default: public)
Repetition counter. (Default: 0)
This enables generation of SNMPv2c traps for
interface up/down events. (Default: No)
Specifies with what severity log events will be sent
to the specified log receivers. (Optional; Default:
Emergency,Alert,Critical,Error,Warning,Notice,Info)
Specifies the routing table the clients host route
should be added to. (Default: main)
Text describing the current object. (Optional)
The Category of the log message.
The ID number of the log message, a empty value
selects all messages of this category. (Optional)
EXCLUDE or INCLUDE. (Default: EXCLUDE)
Specifies with what severity log events will be sent
to the specified log receivers. (Default: Default)
Text describing the current object. (Optional)
176