Table of Contents
Advertisement
Operating
8.1
Local operation
8.1.1
Local display
The device is built for easy operation, making it possible to be commissioned quickly. Its
parameters are menu-driven and can be modified through local operation, using the display and
buttons, also known as the Human Machine Interface (HMI).
①
②
③
④
Note
Local display timeout
If no button is pressed for 10 minutes, display switches to operation view. If parameter
"Backlight" is set to "Automatic", display backlight goes off automatically 30 seconds after the last
button press.
The device menu is shown on the graphical display, and can be navigated using the local
buttons.
8.1.1.1
Access control
Visibility of some menu/parameter items is based on configuration and access level. Although all
visible items and their settings can be viewed in the HMI menu, parameters can be protected
against changes through access level control.
SITRANS TDL
Operating Instructions, 05/2023, A5E51429088_AA
HMI LED
Local buttons
Graphical display
Local operation (HMI)
8
81
Advertisement
Table of Contents
