Table of Contents
Advertisement
Recipient list
The following functions can be executed by tapping on one of the function
surfaces.
Display the contact list with the option of adding/removing additional
recipients (to return to the recipient list, tap the function surface )
Remove a contact from the recipient list
Send the message
Return to message view
Received text message
When you receive a new message, the number of new messages received is
displayed next to the function surface and at the same time the symbol is
displayed in the status bar.
›
To open a list of received messages, go to the Telephone main menu and
tap on function surface → .
›
Select a message.
The message content and the following menu is displayed.
The text can be read out by the device's generated voice
Display a menu with additional options
Reply with template - Reply using a template
▶
▶
Display numbers - Recognition of telephone numbers in the message in-
cluding the contact number (recognised numbers can be dialled directly
or edited before dialling, or may be sent to this message)
Forward a message with the option to edit the message before sending
Reply to the sender via a message
Hotspot (WLAN) and data connection
Hotspot (WLAN)
Introduction to the subject
Applies to Infotainment Amundsen.
WLAN can be used to connect to the Internet, to playback audio files in the
Media menu (if the connected external device allows this) or to operate the
device using an application in the external device (e.g. ŠKODA Media
Command).
The requirement for the WLAN function is that the ignition is switched on. Af-
ter switching on the ignition, the last-used WLAN connection appears.
It is possible to connect up to 8 external devices to the Infotainment hotspot
and at the same time to connect the Infotainment system to the hotspot of
other external devices.
Connecting an external device to the Infotainment system's WLAN
Hotspot
Switch Infotainment hotspot on/off
›
Press the
button, then tap on function surface → WLAN → Mobile hotspot
→ Mobile hotspot.
Set infotainment Hotspot
▶
Press the
button, then tap on function surface → WLAN → Mobile hotspot
→ Hotspot (WLAN) settings.
▶
Configure the required menu items from the following menu.
■
Security level: - WPA2 connection protection always set
Network key - Input of the access password
■
SSID: ... - Name of the infotainment hotspot
■
Do not send network name (SSID) -Turn Infotainment hotspot visibility on/off
■
▶
Tap the function surface Store to save the parameters of the Infotainment
hotspot.
Connection set-up
Switch on WLAN in the external device and search for available hotspots.
▶
Select the Infotainment hotspot.
▶
Hotspot (WLAN) and data connection
135
Advertisement
Table of Contents
