Table of Contents
Advertisement
Enter destination using the address
Fig. 163 Enter destination using the address: Main menu/list of places
found
Display main menu
›
Route guidance is disabled - From the main Navigation menu, tap the func-
tion surface .
›
Route guidance is enabled - From the main Navigation menu, tap the func-
tion surface → Enter dest..
›
If the destination entry menu is not shown via the address
on the function surface →
2
Enter dest.
›
Enter the destination address and then confirm.
Relevant names (e.g. place/street names) are offered in the entry line during
entry, depending on the context. Previously entered names are offered on a
preferential basis.
The location of the destination offered, which is specified in the entry line in
parentheses, can be displayed in the map by tapping the function surface Map.
List of places found
It is possible for a map with a list of places with the same name to be displayed
automatically during input of a place name
The list of places found can also be called up during address entry by pressing
the function surface .
A maximum of 6 locations is shown in the list of locations found, marked with
a letter. In the map, these locations are then marked with the symbol and a
letter, which corresponds to the letter in the list of locations found.
146
Infotainment
» Fig. 163
» Fig. 161
on page 145.
» Fig. 163
- .
If several places have been found, then you can scroll through the list by turn-
ing the controller or sliding the slider.
Note
When entering a street name, there is an option of entering the centre of a
■
given place as a destination instead of a street name, by tapping on function
surface Centre.
After entering the street name, the house number or intersection can be en-
■
tered using the name/number of the intersecting road.
Entering the destination on the map and using GPS coordinates
- , tap
Fig. 164 Enter destination: via the map point/using GPS coordinates
Show map
›
Route guidance is disabled - From the main Navigation menu, tap the func-
tion surface .
›
Route guidance is enabled - From the main Navigation menu, tap the func-
tion surface → Enter dest..
›
Then tap the function surface →
Enter destination via the point
›
While entering a destination into the map, the map scale displayed can be
changed manually
›
Touch the screen to move the desired destination into the cross-hair
» Fig. 164
- .
›
Confirm the destination entry by tapping the function surface .
Entering the destination using coordinates
›
Tap the function surface with the desired GPS coordinates value for the geo-
graphical latitude and geographical longitude
» Fig. 161
on page 145.
5
» page
152, Types of manual scale change.
» Fig. 164
- .
Advertisement
Table of Contents
