Table of Contents
Advertisement
Assembling the bar ball - Step 2
Fig. 219 Secure the lock and remove key / place cap on lock
Read and observe
on page 186 first.
›
Turn the key
in the direction of arrow
A
symbol
» Fig. 219
shows.
›
Remove the key in the direction of the arrow
›
Fit the cap
on the lock in the direction of the arrow
B
›
Check that the ball rod is securely attached
WARNING
After fitting the tow bar, always secure the lock and remove the key. The
tow bar must not be operated with the key inserted.
Check proper fitting
188
Driving
so that the arrow on the key
1,
.
2
.
3
» page
188.
Fig. 220
Correctly secured ball head
Read and observe
on page 186 first.
Correctly secured tow bar
» Fig. 220
The tow bar must sit securely in the receiving shaft. There must be no play
when "shaken" roughly.
The green marking
on the handwheel points to the white marking on
A
the tow bar.
The handwheel is tight against the ball rod.
The lock is locked and the key is removed.
The cap
is on the lock.
B
Removing the bar ball - Step 1.
Fig. 221 Remove cap from the lock / insert key into the lock
Read and observe
on page 186 first.
No trailer or other accessory is connected to the tow bar. We recommend
putting the protective cover onto the ball head before removing the tow bar.
Fig. 222
Unlock lock
Advertisement
Table of Contents
